TASCAM IF-ST2110
MRP - Rs. 5,33,000
TASCAM IF-ST2110 card: 64 x 64 SMPTE ST 2110 / AES67 audio, ST 2022-7 redundancy and Web UI for Sonicview XP and DA-6400. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
The price shown is the MAXIMUM RETAIL PRICE (MRP), inclusive of all taxes. For the best price, exclusive offers and discounted rates, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share an exclusive coupon code that you can apply at checkout. All payments are processed securely through Razorpay, our trusted payment gateway partner.
Audio and network
| Audio standards | SMPTE ST 2110‑30/31, AES67 |
| Channels | 64 in / 64 out (48 kHz) 32 in / 32 out (96 kHz) |
| Sampling frequency | 48 kHz, 96 kHz |
| Bit depth | 16, 24 or 32‑bit (integer) |
| Control | NMOS IS‑04/05 (RDS supports DNS‑SD and mDNS) |
| Synchronisation | PTP: AES67, IEEE 1588‑2008, SMPTE ST 2059‑2 |
| Redundancy | SMPTE ST 2022‑7 |
| Buffer time | 250 µs to 32 ms |
| Packet times | 1 ms / 125 µs |
| Channels per stream | Up to 64 (depends on format and packet time) |
Ports and general
| Ports | CONTROL, PORT 1, PORT 2 |
| Connector | RJ‑45 |
| Ethernet standard | 1000BASE‑T (IEEE 802.3ab) |
| Multicast | SSM (IGMPv3) supported |
| Dimensions (W x H x D) | 107 x 34 x 156.8 mm (including protrusions) |
| Weight | 211 g |
| Operating temperature | 0‑40 °C |
Product overview
The TASCAM IF-ST2110 is an optional SMPTE ST 2110 interface card that adds 64-in / 64-out IP audio to TASCAM Sonicview 16XP / 24XP consoles and the DA-6400 / DA-6400dp recorders.
Compliant with SMPTE ST 2110-30/31 and AES67, it carries 64 x 64 channels at 48 kHz or 32 x 32 at 96 kHz. Two media ports provide SMPTE ST 2022-7 redundant streams, and an independent CONTROL port is used for set-up, changes and monitoring, so a dedicated processing card keeps the system stable. NMOS IS-04/05 discovery and connection management, PTP synchronisation and a built-in Web UI for configuration in a web browser make it ready for IP broadcast studios, remote production and OB vehicles.
Compatible with
- TASCAM Sonicview 16XP / Sonicview 16dp
- TASCAM Sonicview 24XP / Sonicview 24dp
- TASCAM DA-6400 / DA-6400dp
In the box
- IF-ST2110 card
- Owner's Manual (including warranty)
TASCAM IF-ST2110: frequently asked questions
How is the card configured?
Through its built-in Web UI in a web browser, connected to the independent CONTROL port. NMOS IS-04/05 is also supported for discovery and connection management.
Which synchronisation does it use?
PTP, supporting the AES67, IEEE 1588-2008 and SMPTE ST 2059-2 profiles.
Where can I buy the TASCAM IF-ST2110 in India?
The TASCAM IF-ST2110 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: IP broadcast studio
Put a Sonicview console on an SMPTE ST 2110 studio network.
Connections
| Connect | To |
|---|---|
| IF‑ST2110 | Option slot of Sonicview 16XP / 24XP |
| PORT 1 / PORT 2 | Primary and secondary media networks |
| CONTROL | Control network with a computer for the Web UI |
Setup
- Install the card in the console with the power off.
- Connect PORT 1 and PORT 2 to the redundant media networks and CONTROL to the control network.
- Open the Web UI in a browser and set the IP addresses and streams.
- Connect senders and receivers by NMOS or point to point, then route the channels on the console.
Tip: Use both media ports for SMPTE ST 2022-7 redundancy.
Workflow 2: Recording an IP feed on the DA-6400
Record up to 64 network channels in an OB vehicle or remote production.
Connections
| Connect | To |
|---|---|
| IF‑ST2110 | DA‑6400 / DA‑6400dp option slot |
| PORT 1 | ST 2110 media network |
| CONTROL | Control network |
Setup
- Install the card in the recorder with the power off.
- Connect the media and control ports to the networks.
- Configure the receive streams in the Web UI and lock to the PTP clock.
- Arm the tracks and record on the DA-6400.
