






TOTEM ACOUSTIC Bison Monitor
PRICE ON ENQUIRY
Totem Acoustic Bison Monitor: ported two-way bookshelf speaker, 5.25-inch long-throw woofer with 3-inch voice coil, 1.3-inch soft dome tweeter. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Acoustic performance
| Design | Ported two-way monitor speaker |
| Frequency response | 40 Hz - 29.5 kHz ± 3 dB |
| Sensitivity | 87 dB |
| Impedance | 8 Ω |
| Recommended amplifier power | 30 - 150 W |
| Crossover frequency | 2.5 kHz (first order) |
Drivers
| Woofer | 5.25 in (133.35 mm), long throw, 3-inch voice coil |
| Tweeter | 1.3 in (33 mm) laser-etched textile soft dome |
Connections
| Speaker terminals | Four-way, bi-wireable |
| Accepted connections | Bare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in) |
Placement
| Placement from rear wall | 6 in - 3 ft (152 - 914.4 mm) |
| Placement between speakers | 3 - 10 ft (914.4 - 3048 mm) |
| Break-in time | 70 - 100 hours |
Physical
| Width | 171 mm (6.732 in) |
| Height | 333 mm (13.110 in) |
| Depth | 243 mm (9.567 in); 253 mm (9.961 in) with grille installed |
| Grille | Magnetic, included |
| Made in | Canada |
Versions
| BISON-MONITOR-BLACK-ASH | Black Ash |
| BISON-MONITOR-BLACK-WALNUT | Black Walnut |
| BISON-MONITOR-WHITE-OAK | White Oak |
| BISON-MONITOR-SATIN-WHITE | Satin White |
Product overview
The Totem Acoustic Bison Monitor is a made-in-Canada luxury bookshelf speaker: a ported two-way monitor with a custom 5.25-inch long-throw woofer on a 3-inch voice coil and a 1.3-inch laser-etched textile soft dome tweeter, in a cabinet only 171 mm wide.
The Bison Monitor defies the visual expectations of such a small enclosure. It is designed to engage the broadest audience of music lovers, combining Totem's signature characteristics, enormous imaging, phase coherence and remarkable bass response, with broad amplifier compatibility and prodigious power handling.
Its custom-engineered 5.25-inch (133.35 mm) woofer is a long-throw design with a 3-inch voice coil, and the custom 1.3-inch (33 mm) tweeter has a laser-etched textile soft dome. A hand-made first-order crossover joins them at 2.5 kHz, and the ported cabinet reaches down to 40 Hz.
The Bison Monitor rewards its owner in a simple stereo system, with a tube integrated amplifier or as part of a complete Totem surround system. The cabinet is built with artisanal construction, the four-way terminals are bi-wireable, magnetic grilles are included, and it comes in Black Ash, Black Walnut, White Oak and Satin White.
| Frequency response (± 3 dB) | 40 Hz - 29.5 kHz |
| Sensitivity | 87 dB |
| Recommended amplifier power | 30 - 150 W |
| Impedance | 8 Ω |
Key features
- Luxury bookshelf monitor of the Bison series, made in Canada
- Custom 5.25-inch long-throw woofer with a 3-inch voice coil
- Custom 1.3-inch (33 mm) laser-etched textile soft dome tweeter
- Hand-made first-order crossover at 2.5 kHz
- Ported two-way design
- Enormous imaging, phase coherence and remarkable bass for its size
- Broad amplifier compatibility and prodigious power handling
- Artisanal cabinet construction
- Bi-wireable four-way speaker terminals
- Magnetic grilles included
- Finishes: Black Ash, Black Walnut, White Oak and Satin White
Made for
- Stereo music systems on stands or shelves
- Simple stereo systems with an integrated amplifier, including tube amplifiers
- Front or surround channels of a Totem surround system
- Living rooms, bedrooms, studies and smaller rooms
Placement and set-up
- On stands or shelves, at ear level or above
- 6 in - 3 ft (152 - 914.4 mm) from the rear wall
- 3 - 10 ft (914.4 - 3048 mm) between the speakers; placing bookshelf speakers closer to one another can optimise their performance
- Very close to the ceiling, the speaker can be turned upside down, with the tweeter under the woofer
- Break-in: 70 - 100 hours of music, without very loud levels during that time
In the box
- Bison Monitor loudspeaker
- Magnetic grille
- Jumpers fitted between the terminals
Connections
- Bi-wireable four-way speaker terminals (two sets), for single-wire, bi-wire or bi-amp connection
- The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
- Jumpers installed at the factory for single-wire connection
Finishes
- Black Ash, with black magnetic grille
- Black Walnut
- White Oak, with white magnetic grille
- Satin White, with white magnetic grille
Totem Acoustic Bison Monitor: frequently asked questions
Where should the Bison Monitor be placed?
On stands or shelves at ear level or above, 6 in - 3 ft (152 - 914.4 mm) from the rear wall and 3 - 10 ft (914.4 - 3048 mm) apart. Totem notes that bookshelf speakers can be optimised by placing them closer to one another, and that near the ceiling they can be turned upside down.
What amplifier does the Bison Monitor need?
Totem recommends 30 - 150 W into 8 Ω and designed the Bison Monitor for broad amplifier compatibility, from a simple integrated amplifier to a tube integrated. Turn the volume down as soon as distortion starts.
What makes the woofer special?
The custom 5.25-inch woofer is a long-throw design with a 3-inch voice coil, which gives remarkable bass response and prodigious power handling for a small cabinet.
How long does the Bison Monitor take to break in?
Totem specifies 70 - 100 hours of music playing. Avoid very loud levels during that time.
Where can I buy the Totem Acoustic Bison Monitor in India?
The Totem Acoustic Bison Monitor is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo system on stands
Music lovers setting up a compact stereo system in the living room.
Connections
| Connect | To |
|---|---|
| Streamer, CD player or turntable with phono stage | Integrated amplifier input |
| Integrated amplifier L / R speaker outputs (30 - 150 W) | Bison Monitor terminals, jumpers in place |
Setup
- Place the monitors on stands so the tweeters are at ear level or slightly above.
- Keep them 6 in - 3 ft (152 - 914.4 mm) from the rear wall and 3 - 10 ft (914.4 - 3048 mm) apart.
- Sit about 1.5 times the speaker spacing away.
- With everything switched off, connect red (+) to red (+) and black (-) to black (-), leaving the jumpers in place.
- Play music for 70 - 100 hours at moderate levels to break the speakers in.
Tip: Bookshelf speakers can be optimised by moving them a little closer to one another.
Workflow 2: Bookshelf or wall-unit placement
Homes where the speakers sit in a bookcase, on a wall unit or on a high shelf.
Connections
| Connect | To |
|---|---|
| Amplifier or AV receiver L / R outputs | Bison Monitor terminals |
Setup
- Place the monitors on the shelf at ear level or above, keeping at least 6 in (152 mm) behind them.
- If the shelf is very close to the ceiling, turn the speakers upside down so the tweeter sits under the woofer.
- Keep at least 3 ft (914.4 mm) between the speakers.
- Fit the magnetic grilles for a tidy look, or remove them for critical listening.
Tip: Closer to the wall gives more bass but less soundstage depth: try small moves.
Workflow 3: Tube amplifier system
Listeners pairing a tube integrated amplifier with an amplifier-friendly monitor.
Connections
| Connect | To |
|---|---|
| Source | Tube integrated amplifier input |
| Amplifier 8 Ω speaker taps | Bison Monitor terminals |
Setup
- Use the amplifier's 8 Ω outputs to match the Bison Monitor's 8 Ω impedance.
- Place the monitors on stands at ear level.
- Raise the volume gradually and stay below the point where the amplifier starts to distort.
- Allow 70 - 100 hours of break-in.
Tip: More clean power is safer than an amplifier pushed into distortion, the most common cause of speaker damage.
Workflow 4: Bison 5.1 home theatre
Families building a complete Bison surround system for films, TV and games.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC | AV receiver HDMI eARC input |
| AV receiver front L / R outputs | Bison Monitors on stands, or Bison Towers |
| AV receiver centre output | Bison Center |
| AV receiver surround outputs | Bison Monitors |
| AV receiver subwoofer pre-out | Subwoofer |
Setup
- Place the front speakers either side of the screen as for stereo.
- Centre the Bison Center on the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor.
- Place the Bison Monitor surrounds behind and beside the seating at about 6 ft (183 cm) high; in 7.1 add back surrounds behind the listening position.
- Put the subwoofer where it fits best; closer to a corner gives more bass.
- Set distances and levels in the AV receiver.
Tip: The Bison Center shares the DNA of the other Bison series speakers, for a coherent surround system.
Workflow 5: Bi-wired stereo with Totem Tress cable
Listeners who want separate cable runs to the woofer and tweeter sections.
Connections
| Connect | To |
|---|---|
| Amplifier L / R speaker outputs | Totem bi-wire Tress speaker cable |
| Bi-wire ends of the cable | Both sets of Bison Monitor terminals, jumpers removed |
Setup
- Switch the amplifier off before making any connection.
- Remove the jumpers between the two sets of terminals.
- Connect one pair of conductors to each set of terminals, keeping the polarity the same everywhere.
- Switch on at low volume and check that bass and treble play from each speaker.
Tip: Bass loss and a distorted image are signs of reversed polarity: check every connection.
Workflow 6: Home office or study
People who want proper stereo in a study or work room.
Connections
| Connect | To |
|---|---|
| Computer or streamer | Compact integrated amplifier |
| Amplifier L / R speaker outputs | Bison Monitor terminals |
Setup
- Place the monitors on stands or a sturdy shelf at ear level from the seating position.
- Keep 6 in (152 mm) or more from the wall behind.
- Keep the volume at sensible levels during the 70 - 100 hour break-in.
Tip: A room with a variety of materials gives a more harmonised sound.








