









TOTEM ACOUSTIC Element Fire V2
PRICE ON ENQUIRY
Totem Acoustic Element Fire V2 two-way bookshelf monitor: crossover-free 7-inch Torrent woofer, 1-inch titanium tweeter, 30 Hz - 22 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Acoustic performance
| Type | Two-way bookshelf monitor |
| Frequency response | 30 Hz - 22 kHz |
| Sensitivity | 88 dB |
| Impedance | 8 Ω |
| Recommended amplifier power | 50 - 250 W |
| Crossover | First order, on the tweeter only; no crossover in the low-frequency path |
Drivers
| Woofer | 7-inch Torrent, hand-assembled, seventeen 2.5-inch neodymium magnets |
| Tweeter | 1-inch titanium dome with 3/8-inch aluminium faceplate and finned aluminium alloy chamber |
Connections
| Speaker terminals | Bi-wireable premium connectors on an annealed aluminium plate (bi-wire / bi-amp) |
| Accepted connections | Bare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in) |
Placement
| Placement from rear wall | As little as 6 in (15.2 cm); varies with electronics and room acoustics |
| Placement distance apart | As little as 2 ft (61 cm); varies with electronics and room acoustics |
| Recommended stand height | 18 - 24 in (46 - 61 cm), tweeter roughly at ear level |
| Break-in time | 200 - 300 hours |
Physical
| Dimensions (W × H × D) | 223.8 × 421.6 × 297.2 mm (8.81 × 16.6 × 11.7 in) |
| Weight | 14.74 kg (32.4 lb) |
| Cabinet | Geometric design with no parallel surfaces, borosilicate damping |
| Finish | Multi-coat polyester |
| Grille | Matching magnetic grille, included |
| Made in | Montreal, Quebec, Canada (engineered and hand-built) |
Versions
| ELEMENT-FIRE-V2-DUSK | Dusk |
| ELEMENT-FIRE-V2-ICE | Ice |
Product overview
The Totem Acoustic Element Fire V2 is a two-way bookshelf monitor whose efficiency, bass response and power handling suggest a tower. It is built around the second generation of Totem's own 7-inch Torrent woofer, which needs no crossover, and a 1-inch titanium dome tweeter.
The proprietary magnetic design of the Torrent woofer requires no crossover components at all: there is no active or passive crossover in the low-frequency path, so the signal flows from the amplifier to the woofer without interruption and the amplifier controls the woofer's excursion directly. The driver cradle carries seventeen 2.5-inch neodymium magnets, magnetised with a proprietary topology, that encircle the voice coil. The Torrent keeps a significant output up to 5 kHz and gives a midrange of striking articulation, organic harmonics, speed, clarity and detail.
The second-generation Torrent is black anodised and has a slightly larger dust cap, rerouted tinsel leads and further damping, for improved midrange control and better bass extension. The Fire V2 also has a new crossover in the tweeter section and a different internal bass tuning, and it is easier to drive and more flexible to place than its predecessor.
The 1-inch titanium dome tweeter is engineered to match the Torrent. Its 3/8-inch thick aluminium faceplate and finned rear chamber are made from a single solid piece of metal that works as a large radiator, keeping the tweeter stable and cool. A first-order crossover on the tweeter, the only crossover in the speaker, balances the Torrent with sparkling clarity, natural phase and accuracy on and off axis, and the imaging does not shift at the listening position, even through big dynamic swings.
The cabinet has a geometric design with no parallel surfaces, so the energy it holds dissipates quickly and supports the spatial presentation without blurring the image or reducing the dynamics. Borosilicate paint inside acts like a radiator and keeps cabinet stability and sonic performance for the lifetime of the speaker. Bi-wireable premium terminals sit on a custom-machined, annealed aluminium plate, the matching grilles attach with hidden magnets, and every Element V2 loudspeaker is engineered and hand-built in Montreal, Quebec, Canada.
The Fire V2 can be the centrepiece of a family living area, the focal point of a dedicated listening room or the core of a recording studio, and its accuracy across the whole frequency range makes it suitable even for mastering. In a home theatre it works with the Element Wood V2 centre channel, which is voiced to match it.
| Frequency response | 30 Hz - 22 kHz |
| Sensitivity | 88 dB |
| Recommended amplifier power | 50 - 250 W |
| Impedance | 8 Ω |
Key features
- 7-inch Torrent woofer: Totem's own hand-assembled driver with seventeen 2.5-inch neodymium magnets
- No crossover in the low-frequency path: no active or passive parts between the amplifier and the woofer
- Second-generation Torrent: black anodised, slightly larger dust cap, rerouted tinsel leads and further damping
- 1-inch titanium dome tweeter with 3/8-inch aluminium faceplate and finned aluminium alloy chamber
- First-order crossover on the tweeter only
- Geometric cabinet with no parallel surfaces and borosilicate damping inside
- Bi-wireable premium speaker terminals on a custom-machined, annealed aluminium plate, for bi-wire or bi-amp use
- Matching magnetic grilles with hidden magnets, included
- Gleaming multi-coat polyester finishes: Dusk and Ice
- Frequency response 30 Hz - 22 kHz, sensitivity 88 dB (1 W/1 m), 8 Ω
- Engineered and hand-built in Montreal, Quebec, Canada
Made for
- Stereo music listening in a living room or a dedicated listening room
- Recording studios, including mastering
- Front left and right channels of a home theatre, with the Element Wood V2 centre channel
- Music, films, TV and video games
- Placement on stands, shelves or furniture
Placement and set-up
- Stands 18 - 24 in (46 - 61 cm) tall, or shelves, with the tweeter roughly at ear level; fill the stands if they can be filled
- Spikes or cones at the base and a soft absorbing material between the speaker and the stand top improve isolation
- 12 in (30.5 cm) from the back and side walls is the general recommendation; as little as 6 in from the rear wall is possible
- 4 - 10 ft (120 - 300 cm) apart for a proper stereo image (as little as 2 ft), with the listening position about 1.5 times the spacing away
- No toe-in is needed; if the speakers are more than 8 ft (2.5 m) apart and the room affects the imaging, experiment by angling one slightly, then the other
- Break-in: 200 - 300 hours of music, without very loud levels during that time
In the box
- Element Fire V2 loudspeaker
- Matching magnetic grille
Connections
- Bi-wireable premium speaker terminals (two sets) on an annealed aluminium plate, for single-wire, bi-wire or bi-amp connection
- The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
- Jumpers between the two sets of terminals for single-wire connection
Finishes
- Dusk: multi-coat polyester, with matching magnetic grille
- Ice: multi-coat polyester, with matching magnetic grille
Totem Acoustic Element Fire V2: frequently asked questions
What makes the Torrent woofer different?
It needs no crossover. No active or passive parts sit in the woofer path, so the amplifier drives the 7-inch Torrent directly and controls its excursion, without the distortion and inefficiency a crossover adds. Seventeen 2.5-inch neodymium magnets encircle the voice coil, and the woofer keeps a significant output up to 5 kHz.
What amplifier power does the Element Fire V2 need?
Totem recommends 50 - 250 W. More clean amplifier power is safer than an amplifier pushed into distortion, the most common cause of speaker damage: turn the volume down as soon as distortion starts, and use the speaker within its power range.
Can the Element Fire V2 be bi-wired or bi-amped?
Yes. The premium bi-wire / bi-amp terminals sit on an annealed aluminium plate. For a single cable, keep the jumpers in place between the two sets of terminals; make every connection with the equipment switched off.
How should the Element Fire V2 be placed?
On stands 18 - 24 in (46 - 61 cm) tall or on shelves, with the tweeter roughly at ear level, about 12 in (30.5 cm) from the back and side walls and 4 - 10 ft (120 - 300 cm) apart, with the listening position about 1.5 times the spacing away. No toe-in is needed.
How long does the Element Fire V2 take to break in?
Allow 200 - 300 hours of actual music playing, and avoid very loud levels during that time. The music becomes gradually more cohesive as the speakers break in.
Where can I buy the Totem Acoustic Element Fire V2 in India?
The Totem Acoustic Element Fire V2 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo listening room
Music lovers setting up a dedicated listening room or the main stereo system in a living room.
Connections
| Connect | To |
|---|---|
| Streamer, CD player or turntable with phono stage | Integrated amplifier input |
| Integrated amplifier L / R speaker outputs (50 - 250 W recommended) | Element Fire V2 terminals, jumpers in place |
Setup
- Place the Fire V2 on stands 18 - 24 in (46 - 61 cm) tall so the tweeters are roughly at ear level; fill the stands if they can be filled.
- Start about 12 in (30.5 cm) from the back and side walls, with the speakers 4 - 10 ft (120 - 300 cm) apart.
- Sit about 1.5 times the speaker spacing away, for example 9 ft (270 cm) from speakers 6 ft (180 cm) apart.
- With everything switched off, connect the speaker cables to the terminals, keeping the jumpers in place.
- Point the speakers straight ahead: no toe-in is needed; if they are more than 8 ft (2.5 m) apart and the room affects the imaging, angle one slightly, then the other.
- Play music for 200 - 300 hours at moderate levels to break the speakers in.
Tip: Closer to the wall gives more bass but less soundstage depth: move the speakers in small steps.
Workflow 2: Bi-wired stereo with Totem Tress cable
Listeners who want separate cable runs to the woofer and tweeter sections of each speaker.
Connections
| Connect | To |
|---|---|
| Amplifier L / R speaker outputs | Single-stranded end of the Totem bi-wire Tress speaker cable |
| Double-stranded end of the Tress cable | Both sets of Element Fire V2 terminals, jumpers removed |
Setup
- Switch the amplifier off before making any connection.
- Remove the jumpers between the two sets of terminals on each Fire V2.
- Connect the single-stranded end of the bi-wire Tress cable to the amplifier output and the double-stranded end to both sets of terminals.
- Keep the polarity the same on every terminal: positive to positive, negative to negative.
- Switch on at low volume and check that both bass and treble play from each speaker.
Tip: If the bass or the highs are missing, check that every wire is firmly connected, or refit the jumpers for single-wire use.
Workflow 3: Bi-amped stereo system
Enthusiasts who drive the woofer and tweeter sections of each speaker from separate amplifier channels.
Connections
| Connect | To |
|---|---|
| Preamplifier L / R outputs | Inputs of two identical stereo power amplifiers |
| One amplifier channel per set of terminals | Element Fire V2 bi-wire / bi-amp terminals, jumpers removed |
Setup
- Switch all equipment off.
- Remove the jumpers between the two sets of terminals on each speaker.
- Connect one amplifier channel to each set of terminals, keeping the same polarity throughout.
- Feed both power amplifiers from the preamplifier outputs.
- Switch on, start at low volume and check that both sections of each speaker play.
Tip: Stay within the recommended 50 - 250 W and turn the volume down at the first sign of distortion.
Workflow 4: Living-room home theatre
Families who want one system for films, TV, video games and music in the living room.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC | AV receiver HDMI eARC input |
| AV receiver front L / R speaker outputs | Element Fire V2 terminals |
| AV receiver centre speaker output | Element Wood V2 centre channel |
| AV receiver subwoofer pre-out | Subwoofer |
Setup
- Use the Fire V2 as front left and right speakers and place them as for stereo, with the tweeters roughly at ear level.
- Centre the Element Wood V2, voiced to match the Fire V2, on the screen 20 - 30 in (50.8 - 76.2 cm) above the floor, ideally equidistant from the left and right speakers.
- Place the surround speakers behind and beside the seating at about 6 ft (183 cm) high; in a 7.1 system add the back surrounds behind the listening position.
- Put the subwoofer where it fits best; closer to a corner gives more bass.
- Set speaker distances and levels in the AV receiver, then fine-tune positions in small steps.
Tip: Slight changes of position can bring substantially better performance: experiment.
Workflow 5: Recording and mastering studio
Producers and engineers who want accurate passive monitors for recording, mixing and mastering.
Connections
| Connect | To |
|---|---|
| Audio interface or monitor controller line outputs | Stereo power amplifier inputs |
| Power amplifier speaker outputs (50 - 250 W recommended) | Element Fire V2 terminals |
Setup
- Mount the Fire V2 on filled stands so the tweeters are at ear level at the listening position.
- Use spikes or cones at the base and a soft absorbing material between each speaker and its stand top.
- Keep the speakers about 12 in (30.5 cm) from the walls and sit about 1.5 times the speaker spacing away.
- Make all connections with the equipment switched off, then raise the level gradually.
- Complete the 200 - 300 hour break-in before critical mixing or mastering.
Tip: The Fire V2's accuracy across its whole frequency range makes it suitable even for mastering.
Workflow 6: Compact living room on a shelf or furniture
Apartments and smaller rooms where the speakers sit on a shelf, sideboard or TV unit.
Connections
| Connect | To |
|---|---|
| TV, streamer or music player | Stereo amplifier or AV receiver input |
| Amplifier L / R speaker outputs | Element Fire V2 terminals, jumpers in place |
Setup
- Place the Fire V2 on a sturdy shelf or piece of furniture with the tweeter as close to ear level as possible.
- Keep at least 6 in (15.2 cm) from the rear wall and at least 2 ft (61 cm) between the speakers.
- Expect more bass close to the wall; bring the speakers forward if the soundstage loses depth.
- Fit or remove the magnetic grilles as you prefer; the hidden magnets leave a clean front when the grilles are off.
- Break the speakers in over 200 - 300 hours at moderate levels.
Tip: A room with a variety of materials gives a more harmonised sound.








