






TOTEM ACOUSTIC LOON Monitor
PRICE ON ENQUIRY
Totem Acoustic LOON Monitor: compact ported two-way bookshelf speaker, 5.75-inch woofer, textile dome tweeter, made in Canada. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Acoustic performance
| Type | Ported two-way bookshelf monitor |
| Frequency response | 51 Hz - 26 kHz ± 3 dB |
| Sensitivity (1 W) | 87 dB |
| Impedance | 8 Ω |
| Recommended amplifier power | 20 - 110 W |
| Crossover | 2.5 kHz, first order |
Drivers
| Woofer | 5.75-inch, copper-clad voice coil |
| Tweeter | 1-inch (2.54 cm) laser-etched textile soft dome |
Connections
| Speaker terminals | Two pairs of binding posts with jumpers |
| Accepted connections | Bare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in) |
Placement
| Placement from rear wall | 6 in - 3 ft (15.24 - 91.4 cm) |
| Placement distance apart | 3 - 8 ft (91 - 244 cm) |
| Break-in time | 50 - 80 hours |
Physical
| Dimensions (H × W × D) | 273 × 153 × 203 mm (10.75 × 6 × 8 in) |
| Depth with grille | 213 mm (8.375 in) |
| Weight | 3.86 kg (8.5 lb) per speaker |
| Grille | Matching magnetic grille, included |
| Made in | Canada (engineered and handcrafted) |
Versions
| LOON-MONITOR-BLACK-ASH | Black Ash |
| LOON-MONITOR-BLACK-WALNUT | Black Walnut |
| LOON-MONITOR-SATIN-WHITE | Satin White |
Product overview
The Totem Acoustic LOON Monitor is a compact ported two-way bookshelf speaker, engineered and handcrafted in Canada, with a 5.75-inch woofer and a 1-inch laser-etched textile soft dome tweeter. It is forgiving in placement, sounds full even at low volumes and fits anywhere from a bookshelf to a computer desk.
As its namesake implies, the LOON Monitor has a hypnotic, almost mystical ability to transmit sound in a fluid and completely engaging manner, conveying deep emotion, speed and balance in a quasi-full-range sound. It reflects Totem's long experience of building expansive, three-dimensional and musically dynamic sound from a smaller chassis.
Despite its compact cabinet, the LOON gives bass that is deep and tight yet not exaggerated, with excellent impact and decay. A 5.75-inch woofer with a copper-clad voice coil handles the bass and midrange, a 1-inch laser-etched textile soft dome tweeter takes over above a first-order crossover at 2.5 kHz, and a rear port extends the low end to 51 Hz (± 3 dB).
The LOON is forgiving of placement and keeps remarkable sonic performance even when you listen from more than 45 degrees off-axis. It produces full-bandwidth sound at low volumes while offering astonishing imaging and scale, so it suits every musical genre, and it is at home in any space, including on a computer desk. It is also designed as a perfect match for use as rear channels with Totem's Bison Series.
Each LOON is engineered and handcrafted in Canada and comes with a matching magnetic grille. Two pairs of binding posts, linked by jumpers, sit on the rear panel, and the speaker is offered in Black Ash, Black Walnut and Satin White.
| Frequency response (± 3 dB) | 51 Hz - 26 kHz |
| Sensitivity (1 W) | 87 dB |
| Recommended amplifier power | 20 - 110 W |
| Weight per speaker | 3.86 kg |
Key features
- Ported two-way design in a compact cabinet
- 5.75-inch woofer with copper-clad voice coil
- 1-inch laser-etched textile soft dome tweeter
- First-order crossover at 2.5 kHz
- Deep, tight bass with excellent impact and decay
- Remarkable performance even more than 45 degrees off-axis
- Full-bandwidth sound even at low volumes
- Designed as a perfect match for rear channels with the Totem Bison Series
- Matching magnetic grilles included
- Two pairs of binding posts with jumpers
- Black Ash, Black Walnut and Satin White finishes
- Engineered and handcrafted in Canada
Made for
- Stereo music in living rooms, bedrooms and studies
- Computer desks and home offices
- Bookshelves, stands and furniture
- Rear surround channels of a home theatre with Totem Bison Series speakers
- All genres of music, including listening at low volume
Placement and set-up
- On stands or shelves at ear level or above; very close to the ceiling, they can be placed upside down with the tweeter below the woofer
- 6 in - 3 ft (15.24 - 91.4 cm) from the rear wall
- 3 - 8 ft (91 - 244 cm) apart; the listening distance is often about 1.5 times the spacing
- Closer to the walls gives more bass but can reduce the depth of the soundstage
- As surrounds: beside and behind the listening area at about 6 ft (1.8 m) high
- Break-in: 50 - 80 hours of music playing, without very loud levels during that time
In the box
- LOON Monitor loudspeaker
- Matching magnetic grille
Connections
- Two pairs of binding posts, supplied with jumpers installed for single-wire connection; bi-wiring and bi-amping possible with the jumpers removed
- The binding posts accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
Finishes
- Black Ash, with matching magnetic grille
- Black Walnut, with matching magnetic grille
- Satin White, with matching magnetic grille
Totem Acoustic LOON Monitor: frequently asked questions
Can the LOON Monitor be used on a computer desk?
Yes. Totem says the LOON feels at home in any space, including a computer desk, and it produces full-bandwidth sound even at low volumes.
What amplifier power does the LOON Monitor need?
Totem recommends 20 - 110 W. More clean power is safer than an amplifier pushed into distortion, the most common cause of speaker damage: turn the volume down as soon as distortion starts.
How far from the wall should it be?
Between 6 in and 3 ft (15.24 - 91.4 cm) from the rear wall, with the speakers 3 - 8 ft (91 - 244 cm) apart. Closer to the wall gives more bass, further away a deeper soundstage.
Can the LOON be used as a surround speaker?
Yes. It is designed as a perfect match for use as rear channels with Totem's Bison Series. Place surrounds beside and behind the listening area at about 6 ft (1.8 m) high.
How long is the break-in?
Totem quotes 50 - 80 hours of music playing. Avoid very loud levels during that time; the sound becomes gradually more cohesive.
Where can I buy the Totem Acoustic LOON Monitor in India?
The Totem Acoustic LOON Monitor is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Stereo system on stands or a bookshelf
Music lovers setting up a compact stereo system in a living room, bedroom or study.
Connections
| Connect | To |
|---|---|
| Streamer, CD player or turntable with phono stage | Integrated amplifier input |
| Integrated amplifier L / R speaker outputs (20 - 110 W recommended) | LOON Monitor binding posts, jumpers in place |
Setup
- Place the speakers on stands or shelves at ear level or above.
- Keep them 6 in - 3 ft (15.24 - 91.4 cm) from the rear wall and 3 - 8 ft (91 - 244 cm) apart.
- Sit about 1.5 times the speaker spacing away.
- With everything switched off, connect red to red and black to black, leaving the jumpers in place.
- Play music for 50 - 80 hours at moderate levels to break the speakers in.
Tip: Closer to the wall gives more bass but less depth: adjust in small steps.
Workflow 2: Desktop and home-office system
People who want full, detailed sound at their computer desk.
Connections
| Connect | To |
|---|---|
| Computer audio output or a desktop DAC | Compact stereo amplifier |
| Amplifier L / R speaker outputs | LOON Monitor binding posts |
Setup
- Place one LOON on each side of the screen, as close to ear level as possible.
- Leave a little space behind each speaker for the rear port.
- Connect the speakers with the correct polarity, equipment switched off.
- Listen at low to moderate volume: the LOON keeps full bandwidth even when quiet.
Tip: The LOON keeps its performance more than 45 degrees off-axis, so the sound stays balanced as you move.
Workflow 3: Rear surrounds with the Bison Series
Home theatre owners with Totem Bison Series front speakers who need matching rear channels.
Connections
| Connect | To |
|---|---|
| AV receiver surround L / R outputs | LOON Monitor speakers |
| AV receiver front and centre outputs | Totem Bison Series speakers |
Setup
- Place the LOONs beside and behind the listening area at about 6 ft (1.8 m) high.
- In a 7.1 system, add surround backs behind the listening position.
- Connect them to the receiver's surround outputs with the correct polarity.
- Set distances and levels in the receiver.
Tip: The LOON is designed as a perfect match for rear channels with the Bison Series.
Workflow 4: Living-room TV sound
Families who want clearer dialogue and music from the TV with a compact pair of speakers.
Connections
| Connect | To |
|---|---|
| TV with HDMI eARC or optical output | Stereo amplifier or AV receiver with a matching input |
| Amplifier L / R speaker outputs | LOON Monitor binding posts |
Setup
- Place the speakers on the TV unit or on stands either side of the screen.
- Keep them at least 6 in (15.24 cm) from the rear wall.
- Connect the speakers and set the TV audio output to the amplifier.
- Fit the magnetic grilles if you prefer a covered look.
Tip: Add a Totem subwoofer later for deeper film bass.
Workflow 5: Bi-wired stereo
Listeners who want separate cable runs to the woofer and tweeter sections.
Connections
| Connect | To |
|---|---|
| Amplifier L / R speaker outputs | Bi-wire speaker cable, single end |
| Bi-wire cable, double end | Both pairs of LOON binding posts, jumpers removed |
Setup
- Switch the amplifier off.
- Remove the jumpers between the two pairs of binding posts.
- Connect one cable run to each pair, keeping positive to positive and negative to negative.
- Switch on at low volume and check both bass and treble from each speaker.
Tip: Spade lugs must be 8.1 - 9 mm (5/16 - 3/8 in) for a proper fit.
Workflow 6: High shelf or wall unit near the ceiling
Rooms where the only space for speakers is high up, close to the ceiling.
Connections
| Connect | To |
|---|---|
| Amplifier L / R speaker outputs | LOON Monitor binding posts |
Setup
- Place the speakers on the high shelf, at ear level or above.
- If they sit very close to the ceiling, turn them upside down so the tweeter is below the woofer.
- Keep the speakers 3 - 8 ft (91 - 244 cm) apart.
- Connect with the correct polarity and break them in over 50 - 80 hours.
Tip: Totem speakers image beyond their own positions, so a high placement can still give a wide soundstage.








