TOTEM ACOUSTIC Signature One product guide and data sheet cover
‹
TOTEM ACOUSTIC Signature One product guide and data sheet coverTOTEM ACOUSTIC Signature One data sheet page 2: Designed for the 30th anniversaryTOTEM ACOUSTIC Signature One data sheet page 3: A monocoque cabinet built for decadesTOTEM ACOUSTIC Signature One data sheet page 4: Terminals, grilles and finishesTOTEM ACOUSTIC Signature One data sheet page 5: Specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC Signature One

PRICE ON ENQUIRY

Category: Bookshelf Speakers | Series: SIGNATURE

Totem Acoustic Signature One 30th anniversary monitor: 6.5-inch mineral-infused woofer, chambered aluminium dome tweeter, 45 Hz - 22 kHz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Acoustic performance

TypeTwo-way monitor loudspeaker
Frequency response45 Hz - 22 kHz ± 3 dB
Sensitivity (1 W/1 m)87.5 dB
Impedance8 Ω nominal
Recommended amplifier power50 - 200 W
Crossover frequency2.5 kHz, compensated, second order

Drivers

Woofer6.5 in (16.51 cm), mineral-infused, 3 in (7.62 cm) voice coil
Tweeter1 in (2.54 cm) aluminium dome, chambered
Internal wiringSilvered OFC

Connections

Speaker terminalsBi-wireable, four-way, gold-plated, annealed aluminium plate
Accepted connectionsBare wire, pin connectors, banana plugs, spade lugs 8.1 - 9 mm (5/16 - 3/8 in)

Placement

Placement from rear wall1 - 3 ft (30.48 - 91.44 cm)
Placement distance apart4 - 12 ft (121.92 - 365.76 cm)
Break-in time100 - 150 hours

Physical

Dimensions (W × H × D)195 × 350 × 270 mm (7.67 × 13.77 × 10.62 in)
Weight10.5 kg (23.1 lb)
CabinetLock-mitred monocoque, cross-braced, borosilicate damping
GrilleMagnetic, included

Versions

SIGNATURE-ONE-BLACK-VENEERBlack Veneer
SIGNATURE-ONE-MAHOGANY-VENEERMahogany Veneer
SIGNATURE-ONE-SATIN-WHITESatin White

Product overview

The Totem Acoustic Signature One is the monitor Totem designed for its 30th anniversary: a two-way stand-mount speaker with a 6.5-inch mineral-infused woofer derived from the Forest driver, a chambered 1-inch aluminium dome tweeter and a hand-made, hard-wired crossover.

The Signature One is not a comeback of the Model 1 that launched Totem. The spirit of the Model 1 lives deep within it, but it is an elevated, advanced monitor that reflects the progress of Totem's engineering: an homage to the company's history and a retro yet timeless design built to last for decades.

Its 6.5-inch (16.51 cm) woofer, with a 3-inch (7.62 cm) voice coil, and its 1-inch (2.54 cm) aluminium dome tweeter, housed in a rear chamber, were designed together for the best phase relationship. A hand-made crossover of only a few precious components, compensated second order at 2.5 kHz, perfects their synergy, and silvered OFC wiring connects them. Both drivers are specially modified proprietary designs, flush-mounted in the baffle.

The lock-mitred monocoque cabinet has extensive cross-bracing, a radically angled internal floor, internal and external veneers and borosilicate damping that manages energy inside the enclosure while keeping it musically alive. The front baffle is rounded and the rear baffle angled. Bi-wireable gold-plated terminals sit on an annealed aluminium plate, the 8 Ω nominal impedance suits a wide variety of electronics, and magnetic grilles are included.

Frequency response (± 3 dB) 45 Hz - 22 kHz
Sensitivity (1 W/1 m) 87.5 dB
Recommended amplifier power 50 - 200 W
Impedance 8 Ω

Key features

  • 30th anniversary monitor, carrying the spirit of Totem's first speaker, the Model 1
  • 6.5-inch mineral-infused woofer derived from the Forest driver, 3-inch voice coil
  • 1-inch aluminium dome tweeter housed in a rear chamber
  • Drivers designed together for the best phase relationship, flush-mounted
  • Hand-made, hard-wired crossover of only a few components, 2.5 kHz compensated, second order
  • Silvered OFC internal wiring
  • Lock-mitred monocoque cabinet with extensive cross-bracing and a radically angled internal floor
  • Aerodynamic rounded front baffle and angled rear baffle
  • Borosilicate damping inside the cabinet
  • Bi-wireable gold-plated terminals on an annealed aluminium plate
  • Magnetic grilles included

Made for

  • Stereo music listening on stands, in living rooms and listening rooms
  • Music, films, TV and video games
  • A wide variety of amplifiers, thanks to the 8 Ω nominal impedance

Placement and set-up

  • On stands or shelves, at ear level or above
  • 1 - 3 ft (30.48 - 91.44 cm) from the rear wall
  • 4 - 12 ft (121.92 - 365.76 cm) between the speakers
  • Very close to the ceiling, the speaker can be turned upside down, with the tweeter under the woofer
  • Break-in: 100 - 150 hours of music, without very loud levels during that time

In the box

  • Signature One loudspeaker
  • Magnetic grille
  • Jumpers fitted between the terminals

Connections

  • Bi-wireable four-way gold-plated terminals (two sets) on an annealed aluminium plate, for single-wire, bi-wire or bi-amp connection
  • The terminals accept bare wire (wrapped around or through the post), pin connectors, banana plugs and spade lugs of 8.1 - 9 mm (5/16 - 3/8 in)
  • Jumpers installed at the factory for single-wire connection

Finishes

  • Black Veneer
  • Mahogany Veneer
  • Satin White

Totem Acoustic Signature One: frequently asked questions

Is the Signature One a new Model 1?

No. Totem designed it for its 30th anniversary, and the spirit of the Model 1 lives within it, but it is an elevated, advanced monitor with a 6.5-inch woofer derived from the Forest driver and a chambered aluminium dome tweeter.

What amplifier does the Signature One need?

Totem recommends 50 - 200 W. The 8 Ω nominal impedance makes it easy to use with a wide variety of electronics; turn the volume down as soon as distortion starts.

How should the Signature One be placed?

On stands or shelves at ear level or above, 1 - 3 ft (30.48 - 91.44 cm) from the rear wall and 4 - 12 ft (121.92 - 365.76 cm) apart. Fine-tune in small steps: closer to the wall gives more bass but less soundstage depth.

Can the Signature One be bi-wired?

Yes. Its gold-plated four-way terminals on an annealed aluminium plate are bi-wireable, with jumpers installed for single-wire use; remove them to bi-wire or bi-amp, with the equipment switched off.

How long does the Signature One take to break in?

Totem specifies 100 - 150 hours of music playing. Avoid very loud levels during that time.

Where can I buy the Totem Acoustic Signature One in India?

The Totem Acoustic Signature One is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Stereo system on stands

Music lovers setting up a high-quality stereo system in the living room.

Connections

ConnectTo
Streamer, CD player or turntable with phono stageIntegrated amplifier input
Integrated amplifier L / R speaker outputs (50 - 200 W)Signature One terminals, jumpers in place

Setup

  1. Place the speakers on stands so the tweeters are at ear level or slightly above.
  2. Keep them 1 - 3 ft (30.48 - 91.44 cm) from the rear wall and 4 - 12 ft (121.92 - 365.76 cm) apart.
  3. Sit about 1.5 times the speaker spacing away.
  4. With everything switched off, connect red (+) to red (+) and black (-) to black (-), leaving the jumpers in place.
  5. Play music for 100 - 150 hours at moderate levels to break the speakers in.

Tip: Bookshelf speakers can be optimised by moving them a little closer to one another.

Workflow 2: Dedicated listening room

Listeners who want a monitor-sized speaker with a large, three-dimensional image.

Connections

ConnectTo
Preamplifier outputsStereo power amplifier
Power amplifier speaker outputsSignature One terminals

Setup

  1. Use rigid stands that put the tweeters at ear level from the listening seat.
  2. Start about 2 ft (61 cm) from the rear wall and 6 ft (180 cm) apart, then sit about 9 ft (270 cm) away.
  3. Point the speakers straight ahead first, then try small changes.
  4. Remove the grilles for critical listening.

Tip: A room with a variety of materials gives a more harmonised sound.

Workflow 3: Bi-wired stereo with Totem Tress cable

Listeners who want separate cable runs to the woofer and tweeter sections.

Connections

ConnectTo
Amplifier L / R speaker outputsTotem bi-wire Tress speaker cable
Bi-wire ends of the cableBoth sets of Signature One terminals, jumpers removed

Setup

  1. Switch the amplifier off before making any connection.
  2. Remove the jumpers between the two sets of terminals.
  3. Connect one pair of conductors to each set of terminals, keeping the polarity the same everywhere.
  4. Switch on at low volume and check that bass and treble play from each speaker.

Tip: Bass loss and a distorted image are signs of reversed polarity: check every connection.

Workflow 4: Bi-amped stereo system

Enthusiasts who drive the woofer and tweeter sections from separate amplifier channels.

Connections

ConnectTo
Preamplifier L / R outputsTwo identical stereo power amplifiers
One amplifier channel per set of terminalsSignature One terminals, jumpers removed

Setup

  1. Switch all equipment off and read the amplifier manual's bi-amp instructions.
  2. Remove the jumpers between the two sets of terminals.
  3. Connect one amplifier channel to each set of terminals, keeping the same polarity throughout.
  4. Switch on, start at low volume and check that both sections of each speaker play.

Tip: Stay within the recommended 50 - 200 W and turn the volume down at the first sign of distortion.

Workflow 5: Home theatre with a matching centre

Families who want the Signature One at the front of a surround system.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver front L / R outputsSignature One speakers on stands
AV receiver centre outputTotem Model-1 Signature Center

Setup

  1. Place the Signature One speakers either side of the screen as for stereo.
  2. Centre the centre channel to the screen, 20 - 30 in (50.8 - 76.2 cm) above the floor.
  3. Place the surrounds behind and beside the seating at about 6 ft (183 cm) high.
  4. Set distances and levels in the AV receiver.

Tip: Totem's website lists the matching centre channel for each main speaker.

Workflow 6: Shelf or wall-unit system

Homes where the speakers sit on a sturdy shelf or in a wall unit.

Connections

ConnectTo
Amplifier L / R speaker outputsSignature One terminals

Setup

  1. Place the speakers at ear level or above, with at least 1 ft (30.48 cm) behind them where possible.
  2. If they sit very close to the ceiling, turn them upside down so the tweeter is under the woofer.
  3. Fit the magnetic grilles for a tidy look.
  4. Keep the volume below the point where the amplifier starts to distort.

Tip: With most music, an amplifier reaches its maximum power between the 11 and 1 o'clock positions of the volume control.

Request a Quote

TOTEM ACOUSTIC Signature One

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›