FYNE AUDIO FA301iC product guide and data sheet cover
‹
FYNE AUDIO FA301iC product guide and data sheet coverFYNE AUDIO FA301iC data sheet page 2: Full-range sound, hidden awayFYNE AUDIO FA301iC data sheet page 3: Driver technologyFYNE AUDIO FA301iC data sheet page 4: Steerable tweeterFYNE AUDIO FA301iC data sheet page 5: The crossoverFYNE AUDIO FA301iC data sheet page 6: Easy to installFYNE AUDIO FA301iC data sheet page 7: Self-aligning clampsFYNE AUDIO FA301iC data sheet page 8: ApplicationsFYNE AUDIO FA301iC data sheet page 9: Paintable grillesFYNE AUDIO FA301iC data sheet page 10: Specifications
›

Brand: FYNE AUDIO

FYNE AUDIO FA301iC

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: FA300iC SERIES

Fyne Audio FA301iC: 6-inch 2-way coaxial in-ceiling / in-wall speaker, steerable tweeter, FyneFlute, 92 mm depth, paintable grille. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2 way co-axial loudspeaker for in ceiling or in wall application, steerable HF unit
Frequency response (-6 dB, typical in room)44 Hz - 28 kHz
Sensitivity (2.83 V @ 1 m)89 dB
Nominal impedance8 Ω

Power

Recommended amplifier power25 - 100 W RMS
Power handling, continuous50 W RMS
Power handling, peak200 W

Drivers and crossover

Drive unit complement1 × 150 mm (6 in) multi-fibre bass / midrange cone, FyneFlute surround, with 25 mm co-axial polyester dome tweeter
Crossover frequency3.2 kHz
Crossover typePassive 2nd order low pass, 1st order high pass

Installation

Dimensions (diameter × depth)224 × 95 mm (8.8 × 3.7 in)
Cut-out diameter208 mm (8.2 in)
Depth behind mounting surface92 mm (3.6 in)
Clamp travel5 - 50 mm (0.2 - 2.0 in)
Suggested minimum volume10 L
Round grille diameter232 mm (9.1 in)
Square grille dimensions233 × 233 mm (9.2 × 9.2 in), optional version
Net weight (each)2 kg (4.4 lb)

Versions

F80000270Round Grille
F80000270-SquareSquare Grille

Product overview

The Fyne Audio FA301iC is a compact 2-way coaxial in-ceiling / in-wall loudspeaker: a 150 mm (6-inch) multi-fibre bass / midrange cone with FyneFlute surround and a 25 mm polyester dome tweeter on an adjustable pod, a home-install tuned crossover, easy-fit clamps and just 92 mm depth behind the mounting surface.

The FA301iC is the 6-inch model of the FA300iC Series, Fyne Audio's easy-to-install home install range. It uses the same 150 mm multi-fibre bass / midrange cone and 25 mm polyester dome tweeter as the brand's F300 Series loudspeakers, so it brings true full-range hi-fi sound into a room while staying almost invisible in the ceiling or wall.

The tweeter is mounted coaxially in the centre of the mid / bass driver on an adjustable pod that tilts up to 15 degrees, so the sound can be directed towards the prime listening position even when the speaker cannot be placed exactly where you sit. The multi-fibre paper cone uses the FyneFlute roll surround with its distinctive radial pattern, giving a near perfect cone termination for a natural midrange and clean, tight bass.

The crossover draws on the F300 Series design and many of its components, enhanced for a smooth response from an in-ceiling position. Low-loss laminated core inductors and high-grade polyester capacitors give a clean signal path with very low crossover losses. With 89 dB sensitivity (2.83 V @ 1 m), 8 Ω nominal impedance and power handling of 50 W continuous and 200 W peak, the FA301iC is efficient and easy to drive.

Installation is simple: a round cut-out of 208 mm made with the supplied mounting template, four self-aligning clamps that grip boards from 5 to 50 mm thick, and spring-loaded cable terminals. A round low-profile magnetic grille is supplied and can be painted to match any décor; a square grille is available as an optional version. It suits everything from ambient music in the kitchen to surround channels in a home theatre.

Frequency response (-6 dB, in room) 44 Hz - 28 kHz
Multi-fibre bass / midrange cone 150 mm
Sensitivity (2.83 V @ 1 m) 89 dB
Depth behind mounting surface 92 mm

Key features

  • 2-way coaxial in-ceiling / in-wall loudspeaker with steerable HF unit
  • 150 mm (6-inch) multi-fibre bass / midrange cone with FyneFlute surround
  • 25 mm polyester dome tweeter on an adjustable pod with up to 15 degrees of tilt
  • Drivers shared with the F300 Series loudspeakers
  • Home-install tuned crossover with low-loss laminated core inductors and polyester capacitors
  • Sensitivity: 89 dB (2.83 V @ 1 m), nominal impedance 8 Ω
  • Power handling: 50 W continuous, 200 W peak
  • Shallow: 92 mm depth behind the mounting surface
  • Four self-aligning clamps, 5 - 50 mm clamp travel
  • Spring-loaded cable terminals
  • Round low-profile magnetic grille, paintable; square grille as an optional version

Made for

  • Ambient and background music in kitchens, living rooms and bedrooms
  • Stereo listening areas with speakers in the ceiling or wall
  • 5.1 home theatre surround channels, or an additional FX channel on the ceiling or wall
  • Multi-zone music systems with a multi-zone amplifier
  • Ceilings and hollow or false walls

In the box

  • 1 × 6-inch coaxial loudspeaker
  • 1 × round grille
  • 1 × mounting template

Connections

  • Two spring-loaded speaker cable terminals (positive and negative)

Finishes

  • Round grille: round low-profile magnetic grille, supplied as standard, paintable
  • Square grille: square grille version, 233 × 233 mm, paintable

Fyne Audio FA301iC: frequently asked questions

Can the FA301iC be used in a wall as well as a ceiling?

Yes. It is a 2-way coaxial loudspeaker for in-ceiling or in-wall application, and the self-aligning clamps make it just as easy to install in hollow or false walls as in a ceiling.

How do I aim the sound towards the seating area?

The tweeter sits on an adjustable pod with up to 15 degrees of tilt. Press down firmly on the silver trim edge of the tweeter to angle it towards the centre of the primary listening area.

What size hole and depth does it need?

The cut-out diameter is 208 mm and the depth behind the mounting surface is 92 mm. The clamps grip boards from 5 to 50 mm thick, and the suggested minimum enclosure volume is 10 L.

Can the grille be painted?

Yes. Remove the scrim from the rear of the magnetic grille, then paint with brush or aerosol in several thin coats so the perforations are not blocked. The scrim can be re-applied with a light coat of aerosol fabric adhesive.

Is it suitable for home theatre?

Yes. The FA300iC Series is as impressive with films as with music, and the steerable tweeter articulates movie detail accurately, whether used as a 5.1 channel or an additional FX channel on the ceiling or wall.

Where can I buy the Fyne Audio FA301iC in India?

The Fyne Audio FA301iC is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Kitchen and dining ambient music

Homes that want music in the kitchen or dining area without speakers on the counter.

Connections

ConnectTo
Stereo amplifier or streaming amplifier left / right outputsTwo FA301iC spring terminals

Setup

  1. Check with a stud locator that there are no joists, pipes or cables at the chosen spots.
  2. Stick the supplied mounting template on the ceiling and cut the 208 mm hole with a keyhole saw.
  3. Run good quality speaker cable with enough slack to fit or remove the speaker, and connect it to the spring terminals, positive to positive.
  4. Turn the four clamps fully inwards, fit the speaker and tighten the clamp screws without over-tightening.
  5. Snap the magnetic grille into place.

Tip: Building regulations may require a fire hood behind the speaker; the installer must check local rules.

Workflow 2: Stereo listening area in the ceiling

Living rooms where a clean ceiling is preferred to free-standing speakers.

Connections

ConnectTo
Amplifier left output (25 - 100 W RMS)FA301iC left
Amplifier right outputFA301iC right

Setup

  1. Place the two speakers to suit the primary listening area, as in a typical 2-channel layout.
  2. Install them with the template, keyhole saw and self-aligning clamps.
  3. Press down firmly on the silver trim edge of each tweeter to angle it towards the centre of the listening area.
  4. Fit the grilles and play at normal levels.

Tip: The tweeter pod tilts up to 15 degrees, so the sound can be aimed even when the speaker position is fixed by joists.

Workflow 3: 5.1 home theatre surrounds

Living-room home theatres that want discreet surround channels.

Connections

ConnectTo
AV receiver surround left / right outputsFA301iC surround speakers

Setup

  1. Plan the surround positions in the ceiling or side walls around the seating, as in a typical 5.1 layout.
  2. Install the speakers with the cut-out template and clamps.
  3. Aim each tweeter towards the centre of the seating area.
  4. Run the AV receiver's speaker set-up and set levels.

Tip: The steerable tweeter articulates movie detail accurately from a ceiling position.

Workflow 4: Additional FX channel on the ceiling

Home theatres adding effects channels above the seating.

Connections

ConnectTo
AV receiver additional speaker outputsFA301iC in the ceiling

Setup

  1. Choose ceiling positions above and around the seating for the effects channels.
  2. Cut the 208 mm holes and fit the speakers with the self-aligning clamps.
  3. Angle the tweeters towards the main seats.
  4. Assign the outputs in the AV receiver and calibrate the levels.

Tip: Paint the grilles to match the ceiling so the effects speakers disappear.

Workflow 5: Multi-zone music around the home

Homes that want background music in several rooms from one system.

Connections

ConnectTo
Multi-zone amplifier zone outputsFA301iC pairs in each room

Setup

  1. Plan a pair of FA301iC for each room or zone.
  2. Run speaker cable from each room back to the multi-zone amplifier location.
  3. Install the speakers and connect each pair to its zone output.
  4. Set each zone's level for quiet background music or louder listening.

Tip: High efficiency and power handling let a zone go from background music to party level.

Workflow 6: In-wall installation with painted grilles

Rooms with hollow or false walls and a strong colour scheme.

Connections

ConnectTo
Amplifier speaker outputsFA301iC in the wall

Setup

  1. Check the wall cavity is clear and gives at least 92 mm depth and about 10 L of volume.
  2. Cut the hole with the template and fit the speaker with the clamps (5 - 50 mm board thickness).
  3. Remove the scrim from the grille and paint it in several thin coats to match the wall.
  4. Re-apply the scrim with a light coat of fabric adhesive and snap the grille on.

Tip: Choose the round or square grille version to suit the room's design.

Request a Quote

FYNE AUDIO FA301iC

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›