TONEWINNER QS-6+ product guide and data sheet cover
‹
TONEWINNER QS-6+ product guide and data sheet coverTONEWINNER QS-6+ data sheet page 2: Coaxial designTONEWINNER QS-6+ data sheet page 3: Installation and specifications
›

Brand: TONEWINNER

TONEWINNER QS-6+

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: QS SERIES

Tonewinner QS-6+ passive coaxial in-ceiling speaker: 6" woofer + 1" tweeter, 55 W rated, 86 dB, 98 Hz - 20 kHz, 8 Ω, 206-216 mm cutout. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

ModelQS-6+
SeriesQS series
TypePassive coaxial in-ceiling speaker

Drivers

Woofer6" × 1
Tweeter1" × 1, coaxial

Acoustic performance

Sensitivity86 dB
Frequency range98 Hz - 20 kHz
Rated impedance8 Ω
DC impedance6.4 Ω (+15 %)
Rated power output55 W
Input power range15-110 W

Physical

Dimensions240 mm diameter × 145 mm (± 1.5 mm) depth
Installation hole size206-216 mm diameter × 140 mm depth
GrilleWhite, round, low-profile
Net weight2 kg per piece
Gross weight5 kg for two pieces

Product overview

The Tonewinner QS-6+ is a passive 8 Ω coaxial in-ceiling speaker that combines a 6-inch woofer and a 1-inch tweeter in a compact round enclosure with a white low-profile grille, made for home cinemas and custom-installed audio.

The QS series is Tonewinner's range of embedded speakers for custom installation in villas, home theatres, professional theatres, hotels, cafés, movie cafés, leisure clubs, conference halls and background music systems. Thin and light, simple and fashionable, the QS-6+ disappears into the ceiling: only the round white grille, 240 mm across, remains in view.

Its coaxial design places the high-frequency and low-frequency drivers on the same acoustic axis, so sound reaches the listening area from one consistent point. That suits ceiling installations where even coverage and clear vocal reproduction matter. The 6-inch woofer handles the main audio range while the 1-inch tweeter reproduces the high-frequency detail.

The QS-6+ has a rated power of 55 W, an input power range of 15-110 W, 86 dB sensitivity and a frequency response of 98 Hz - 20 kHz. As a passive speaker it needs an external power amplifier or an AV receiver that supports 8 Ω speakers. For deeper bass and stronger low-frequency effects in films and music, Tonewinner recommends combining it with a dedicated subwoofer.

Installation is straightforward in new construction and renovation projects: the ceiling opening is 206-216 mm in diameter and about 140 mm of depth is needed behind the ceiling for the 145 mm deep enclosure. Check the ceiling structure, the available depth and the speaker cable route before cutting.

coaxial woofer and tweeter 6" + 1"
rated power 55 W
frequency response 98 Hz - 20 kHz
ceiling cutout Ø 206-216 mm

Key features

  • Coaxial configuration: 6-inch woofer and 1-inch tweeter on the same acoustic axis
  • Passive speaker, standard 8 Ω rated impedance
  • Rated power 55 W; input power range 15-110 W
  • Sensitivity 86 dB
  • Frequency response 98 Hz - 20 kHz
  • Compact 240 mm round enclosure, 145 mm deep
  • White low-profile grille for discreet ceiling integration
  • 206-216 mm installation cutout, about 140 mm installation depth
  • Even coverage and clear vocal reproduction from the ceiling
  • Suits residential and commercial installed-audio systems

Made for

  • Home cinemas, as ceiling or overhead speakers
  • Distributed background music in villas, apartments, cafés, lounges and private clubs
  • Hotel rooms and commercial interiors
  • Meeting rooms and conference rooms for speech and programme audio

In the box

  • QS-6+ in-ceiling speaker

Tonewinner QS-6+: frequently asked questions

Is the QS-6+ an active or passive speaker?

The QS-6+ is a passive speaker. It needs an external power amplifier or an AV receiver that supports 8 Ω speakers.

What amplifier can be used with the QS-6+?

The speaker has a rated power of 55 W and an input power range of 15-110 W, and the amplifier should support an 8 Ω load. For installations with several speakers, have a qualified installer calculate the total impedance and amplifier load.

What ceiling opening is required?

The recommended cutout diameter is 206-216 mm, and about 140 mm of installation depth is needed behind the ceiling.

Can the QS-6+ be used in a home cinema?

Yes. It is designed for custom-installed home cinema systems and can be used as a ceiling or overhead speaker, depending on the room layout and the AV system configuration.

Does the QS-6+ need a subwoofer?

Its published frequency response starts at 98 Hz, so a dedicated subwoofer is recommended when deeper bass and stronger low-frequency effects are wanted for films or music.

Where can I buy the Tonewinner QS-6+ in India?

The Tonewinner QS-6+ is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Overhead speakers in a 5.1.2 living room

Families adding overhead sound to a living-room home cinema.

Connections

ConnectTo
AV receiver top front or top middle terminalsTwo QS-6+ in the ceiling
AV receiver subwoofer pre-outPowered subwoofer

Setup

  1. Plan two ceiling positions slightly in front of the main seat, in line with the front left and right speakers.
  2. Check joists, pipes and the 140 mm depth, then cut 206-216 mm openings.
  3. Run speaker cable from the receiver and connect each QS-6+ with the correct polarity.
  4. Fit the speakers and attach the white grilles.
  5. Set the receiver to 5.1.2 with the heights as small speakers crossed over to the subwoofer, then calibrate.

Tip: The 98 Hz lower limit makes a subwoofer and a proper crossover setting important.

Workflow 2: 7.2.4 dedicated cinema room overheads

Home cinema builders creating a full overhead layer.

Connections

ConnectTo
AV processor or receiver top front and top rear outputsFour QS-6+ in the ceiling
Subwoofer outputsTwo powered subwoofers

Setup

  1. Lay out two QS-6+ ahead of and two behind the main seating row.
  2. Cut the openings and pre-wire every channel to the equipment rack, labelling each cable.
  3. Connect the speakers and set the processor to 7.2.4.
  4. Run room calibration from the main seat and check each height channel with test tones.

Tip: Final positioning and channel assignment should follow the room size, seating and processor configuration.

Workflow 3: Whole-home background music

Villas and apartments with music in several rooms.

Connections

ConnectTo
Multi-zone amplifier outputsQS-6+ in the ceiling of each room
Streamer or phone sourceAmplifier inputs

Setup

  1. Plan one or two QS-6+ per room depending on its size.
  2. Cut the openings and run cable from each room to the amplifier location.
  3. Connect the speakers, keeping each amplifier channel within its rated load.
  4. Set levels room by room for comfortable background music.

Tip: With several speakers per channel, have an installer calculate the total impedance first.

Workflow 4: Café, lounge or private club

Hospitality venues that want music without visible boxes.

Connections

ConnectTo
Commercial amplifier outputsA grid of QS-6+ over the seating

Setup

  1. Space the speakers evenly over the seating area for even coverage.
  2. Cut the 206-216 mm openings and pre-wire.
  3. Connect to the amplifier, keeping the total load within its rating.
  4. Set the level so music and conversation sit comfortably together.

Tip: The coaxial drivers give consistent sound from each point, which helps even coverage.

Workflow 5: Meeting room speech and programme audio

Offices fitting out meeting and presentation rooms.

Connections

ConnectTo
Conference system or mixer outputAmplifier input
Amplifier outputQS-6+ in the ceiling

Setup

  1. Place the speakers over the table and seating areas.
  2. Install them in the ceiling and wire them to the amplifier.
  3. Connect the laptop and conferencing audio to the mixer or amplifier.
  4. Adjust the level for clear speech at every seat.

Tip: Keep ceiling speakers away from directly above the microphones.

Workflow 6: Hotel room built-in sound

Hotels adding discreet audio to rooms and suites.

Connections

ConnectTo
Room amplifier or TV audio amplifierOne or two QS-6+ in the ceiling

Setup

  1. Fit one QS-6+ above the seating area, or two in larger suites.
  2. Wire to a compact amplifier near the TV.
  3. Connect the TV and music source.
  4. Set a maximum volume suitable for hotel use.

Tip: The white low-profile grille blends with most ceiling finishes.

Request a Quote

TONEWINNER QS-6+

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›