TONEWINNER TD-10 product guide and data sheet cover
‹
TONEWINNER TD-10 product guide and data sheet coverTONEWINNER TD-10 data sheet page 2: Home theatre and karaoke in one
›

Brand: TONEWINNER

TONEWINNER TD-10

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: TD SERIES

Tonewinner TD-10 three-way home theatre and karaoke speaker: 1" silk tweeter, 5.25" mid, 10" bass, 35 Hz - 20 kHz, 100 W rated, slim 165 mm cabinet. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

ModelTD-10
TypeThree-way full-range home theatre and karaoke loudspeaker

Drivers

Tweeter1" × 1, transparent silk diaphragm
Midrange5.25" × 1
Bass10" × 1, one-piece cast aluminium frame

Acoustic performance

Frequency range35 Hz - 20 kHz
Sensitivity88 dB
Impedance6 Ω
Rated power100 W
Input power110 W

Physical

CabinetMedium-density fibreboard, wood veneer, ultra-thin
Unit size320 × 480 × 165 mm
Net weight10 kg per piece
Gross weight25 kg for two pieces

Finishes

ColourBrown

Product overview

The Tonewinner TD-10 is a three-way full-range home theatre loudspeaker in an ultra-thin wood-veneered cabinet, built with a 1-inch silk-dome tweeter, a 5.25-inch midrange and a 10-inch bass driver for both small-theatre sound and karaoke.

Tonewinner designed the TD-10 as a multi-purpose speaker for villa home theatres and family rooms. One cabinet serves two jobs: amplifying films in a small theatre and reproducing voices and music for karaoke. The cabinet is made of medium-density fibreboard finished in wood veneer, and its ultra-thin design, 320 × 480 × 165 mm, makes it convenient for engineering installation close to or on a wall.

The tweeter uses a transparent silk diaphragm, giving a bright, transparent sound with well-extended high frequencies. It also has a high power-handling capacity, so it withstands the very high power of a home theatre with minimal distortion.

The mid-bass unit uses a natural vibrating cone material with an even and natural frequency distribution. A layer of high-damping glue mixed with natural minerals is pressed onto the cone: internal damping is excellent, strength is greatly improved, distortion is lower and transients are better, so the sound is particularly delicate and sweet. The 10-inch bass driver sits in a one-piece cast aluminium frame.

On paper the TD-10 reaches down to 35 Hz with 88 dB sensitivity and a 6 Ω impedance. It has a rated power of 100 W and an input power of 110 W, which suits the main channels of an AV receiver or a karaoke amplifier.

1" + 5.25" + 10" 3-way
frequency range 35 Hz - 20 kHz
rated power 100 W
ultra-thin cabinet depth 165 mm

Key features

  • Three-way full-range design: 1-inch tweeter, 5.25-inch midrange, 10-inch bass driver
  • Tweeter with transparent silk diaphragm: bright, transparent sound and well-extended treble
  • High power-handling tweeter with minimal distortion at home theatre levels
  • Natural cone mid-bass with a pressed high-damping glue and natural mineral layer
  • Bass driver in a one-piece cast aluminium frame
  • Frequency range 35 Hz - 20 kHz, sensitivity 88 dB
  • Rated power 100 W, input power 110 W, impedance 6 Ω
  • Ultra-thin MDF cabinet, 320 × 480 × 165 mm, convenient for installation
  • Wood-veneer finish in brown with a black grille
  • Made for both small-theatre amplification and karaoke

Made for

  • Villa home theatres and small private cinemas
  • Family living rooms
  • Karaoke at home
  • Installations where a slim cabinet is needed

In the box

  • TD-10 loudspeaker

Finishes

  • Brown wood veneer

Tonewinner TD-10: frequently asked questions

What drivers does the TD-10 use?

A 1-inch tweeter with a transparent silk diaphragm, a 5.25-inch midrange and a 10-inch bass driver in a one-piece cast aluminium frame.

Can it be used for karaoke?

Yes. Tonewinner designed the TD-10 as a multi-purpose speaker that meets both functions: small home theatre amplification and karaoke.

Why is the cabinet so slim?

The ultra-thin MDF box, only 165 mm deep, is designed to make engineering installation convenient in villa theatres and family rooms.

What amplifier suits it?

An AV receiver or karaoke amplifier that works with 6 Ω speakers. The TD-10 has a rated power of 100 W, an input power of 110 W and 88 dB sensitivity.

How much does it weigh?

The net weight is 10 kg per piece.

Where can I buy the Tonewinner TD-10 in India?

The Tonewinner TD-10 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Villa home theatre front stage

Villa owners building a small private cinema.

Connections

ConnectTo
AV receiver front L / R speaker terminalsTwo TD-10 either side of the screen
AV receiver centre and surround terminalsCentre and surround speakers
AV receiver subwoofer pre-outPowered subwoofer

Setup

  1. Place one TD-10 either side of the screen, tweeters near ear height for the seated audience.
  2. Connect each to the receiver's front left and right terminals with the correct polarity.
  3. Set the front speakers to 6 Ω in the receiver if it offers an impedance setting.
  4. Run the receiver's room calibration or set distances and levels.
  5. Play a film and check dialogue clarity and bass balance.

Tip: The ultra-thin 165 mm cabinet can stand close to the front wall, saving room depth.

Workflow 2: Home karaoke and film room

Families who sing as often as they watch films.

Connections

ConnectTo
Karaoke amplifier or AV receiver with karaoke function speaker outputsTwo TD-10
Wireless or wired microphonesAmplifier MIC inputs
TV or song playerAmplifier input

Setup

  1. Position the TD-10 pair in front of the singers, angled towards the room and away from the microphones.
  2. Connect them to the karaoke amplifier's main outputs.
  3. Set microphone volume, echo and reverb on the amplifier.
  4. Switch to the film mode on the amplifier for movie nights.

Tip: The 1-inch silk tweeter has high power-handling capacity, but keep microphones behind the speaker line to avoid feedback.

Workflow 3: Living-room stereo for TV and music

Families who want big, full sound from two speakers.

Connections

ConnectTo
Stereo or integrated amplifier L / R outputsTwo TD-10
TV optical output or streamerAmplifier input

Setup

  1. Place the speakers either side of the TV, about as far apart as the sofa is from them.
  2. Connect them to the amplifier's left and right outputs.
  3. Feed TV sound and music to the amplifier.
  4. Adjust toe-in until voices lock to the centre of the screen.

Tip: With a 35 Hz lower limit, many rooms will not need a subwoofer for music.

Workflow 4: Slim speakers mounted close to the wall

Installers fitting speakers into tight spaces in a home theatre.

Connections

ConnectTo
AV receiver speaker terminalsTD-10 fitted on or near the wall

Setup

  1. Plan the positions so the 320 × 480 mm front faces the seats.
  2. Pre-wire speaker cable to each position.
  3. Fix the speakers securely, allowing for the 10 kg weight of each piece.
  4. Connect and test each channel.

Tip: Use mounting hardware rated well above the 10 kg net weight.

Workflow 5: 5.1 family home theatre

Homes upgrading a TV to full surround sound.

Connections

ConnectTo
AV receiver front L / R terminalsTwo TD-10
AV receiver centre, surround and subwoofer outputsCentre, surround speakers and subwoofer
Disc player or streaming boxAV receiver HDMI input

Setup

  1. Place the TD-10 pair at the front left and right.
  2. Add a centre speaker below the TV and surround speakers beside or behind the sofa.
  3. Connect everything to the receiver and select a 5.1 layout.
  4. Calibrate levels, then play a film.

Tip: The 10-inch bass driver gives the fronts real weight, which helps when the subwoofer crossover is set low.

Workflow 6: Party and gathering sound

Homes that host get-togethers and want loud, clean music.

Connections

ConnectTo
Amplifier speaker outputsTwo TD-10
Phone, laptop or media playerAmplifier input

Setup

  1. Place the speakers at the front of the room, facing the guests.
  2. Connect them to an amplifier suited to 6 Ω loads.
  3. Play music and raise the level steadily.
  4. Back off if the sound hardens; stay within the rated power.

Tip: The 88 dB sensitivity means a capable amplifier gets a room going without strain.

Request a Quote

TONEWINNER TD-10

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›