TONEWINNER QS-8 product guide and data sheet cover
‹
TONEWINNER QS-8 product guide and data sheet coverTONEWINNER QS-8 data sheet page 2: Built for custom installation
›

Brand: TONEWINNER

TONEWINNER QS-8

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: QS SERIES

Tonewinner QS-8 8-inch in-ceiling speaker for home theatre and custom installation: 90 dB, 50 W rated, 8 Ω, 50 Hz - 20 kHz, white grille. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

ModelQS-8
SeriesQS series
TypeIn-ceiling speaker for custom installation

Driver

Driver8" × 1

Acoustic performance

Sensitivity90 dB
Frequency range50 Hz - 20 kHz
Rated impedance8 Ω
Rated power50 W

Physical

Size (as published)345 × 345 × 245 mm (± 1.5 mm)
Box size280 mm diameter × 190 mm depth
Install hole size247 mm diameter × 210 mm depth
Net weight3.87 kg per piece
Gross weight4.5 kg per piece

Product overview

The Tonewinner QS-8 is an 8-inch in-ceiling speaker from the QS series, made for custom installation in home theatres, villas, hotels, cafés and halls, with a sensitivity of 90 dB and a rated power of 50 W.

The QS series is Tonewinner's family of embedded speakers for customised installation. Only the round white grille shows in the ceiling; the rest of the speaker sits above it in its own enclosed back box, which mounts into an install hole of 247 mm diameter with 210 mm of depth. The look is thin and light, simple and fashionable, so the speaker integrates easily with the decoration of the room.

A single 8-inch driver covers a frequency range of 50 Hz - 20 kHz, generous for a ceiling speaker. Tonewinner describes the series as stable in performance with excellent sound quality, full and elastic low frequencies, a good transient response, a clear sound texture, a warm and mellow tone and natural, delicate high-frequency extension.

With 90 dB sensitivity and an 8 Ω rated impedance, the QS-8 plays loud and clear from modest amplifier power. It suits overhead or surround channels in a home theatre as well as background music in villas, hotels, cafés, leisure clubs, conference halls and similar spaces.

Within the QS series, the QS-8 is the larger ceiling model beside the 6-inch coaxial QS-6+, and it shares the clean styling of the QS wall speakers, so one look runs through the whole installation.

driver 8"
sensitivity 90 dB
frequency range 50 Hz - 20 kHz
rated power 50 W

Key features

  • 8-inch driver for full sound from the ceiling
  • Frequency range 50 Hz - 20 kHz
  • Sensitivity 90 dB
  • Rated power 50 W, rated impedance 8 Ω
  • Enclosed back box for custom installation
  • Install hole 247 mm diameter, 210 mm depth
  • Round white grille that blends with the ceiling
  • Thin, light, simple and fashionable design with exquisite craftsmanship
  • Stable performance, clear sound texture and warm, mellow tone
  • Net weight 3.87 kg per piece

Made for

  • Home theatres and villa cinemas
  • Villas and homes with background music
  • Hotels, cafés, movie cafés and leisure clubs
  • Conference halls
  • Background music systems

In the box

  • QS-8 in-ceiling speaker

Tonewinner QS-8: frequently asked questions

What size hole does the QS-8 need?

The install hole is 247 mm in diameter, with 210 mm of depth above the ceiling for the speaker's back box.

Is it suitable for a home theatre?

Yes. The QS series is designed for customised installation in home theatres as well as villas, hotels, cafés, leisure clubs and conference halls. The QS-8 can serve as an overhead or surround speaker.

What amplifier does it need?

An AV receiver or amplifier that works with 8 Ω speakers. The QS-8 has a rated power of 50 W and a sensitivity of 90 dB.

How much bass does it give?

The published frequency range of the 8-inch driver is 50 Hz - 20 kHz. Add a subwoofer when the system needs deep cinema effects.

How heavy is it?

The net weight is 3.87 kg per piece, so check that the ceiling material can carry it before installation.

Where can I buy the Tonewinner QS-8 in India?

The Tonewinner QS-8 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Overhead channels for a 5.1.2 home theatre

Home theatre owners adding height sound above the seats.

Connections

ConnectTo
AV receiver height or top-middle speaker terminalsTwo QS-8 in the ceiling
AV receiver front, centre, surround and subwoofer outputsThe existing 5.1 system

Setup

  1. Mark two positions in the ceiling slightly in front of or directly above the main seats, one each side.
  2. Check there is at least 210 mm of free depth above the ceiling, then cut 247 mm holes.
  3. Run speaker cable from the receiver to each hole and connect with the correct polarity.
  4. Fit the QS-8 into the holes.
  5. Set the receiver to 5.1.2 with the height speakers as small and calibrate levels and distances.

Tip: Check joists and pipes above the ceiling before cutting: the back box needs the full 210 mm depth.

Workflow 2: Background music in a villa or apartment

Homes wanting music in the living, dining and kitchen areas from invisible speakers.

Connections

ConnectTo
Stereo amplifier or multi-zone amplifier outputsPairs of QS-8 in each room
Streamer or phone sourceAmplifier input

Setup

  1. Plan one pair of QS-8 per room, spread to cover the seating and walking areas.
  2. Cut the 247 mm holes and pre-wire each pair back to the amplifier location.
  3. Connect each pair to its own amplifier channel pair, keeping the total load within the amplifier's rating.
  4. Set comfortable levels for each room.

Tip: With 90 dB sensitivity, modest amplifier power fills a normal room at background levels.

Workflow 3: Café or movie café sound

Café and lounge owners who want even, clear music across the floor.

Connections

ConnectTo
Commercial or stereo amplifier outputsSeveral QS-8 in the ceiling

Setup

  1. Space the speakers evenly over the seating area.
  2. Cut the install holes and run cable from the amplifier rack.
  3. Wire the speakers so the total load suits the amplifier; ask an installer to calculate it for larger systems.
  4. Set the level so conversation stays easy.

Tip: The round white grille keeps the ceiling clean and fits most interiors.

Workflow 4: Hotel room or suite

Hotels and guest houses adding built-in sound to rooms.

Connections

ConnectTo
Room amplifier or AV receiverOne or two QS-8 in the ceiling

Setup

  1. Fit one QS-8 over the seating area, or two for stereo in larger suites.
  2. Pre-wire to a compact amplifier near the TV.
  3. Connect the TV or a music source to the amplifier.
  4. Limit the maximum volume to keep the neighbours comfortable.

Tip: Fit the speakers before the false ceiling is painted, with cables marked by room.

Workflow 5: Conference hall speech and programme sound

Offices and halls that need clear speech over the seating.

Connections

ConnectTo
Mixer or conference system outputAmplifier input
Amplifier outputsQS-8 ceiling speakers over the seats

Setup

  1. Place the speakers in a grid over the audience area.
  2. Install them in 247 mm holes with 210 mm of depth.
  3. Connect the microphones and laptop audio through the mixer to the amplifier.
  4. Walk the room and adjust levels for even coverage.

Tip: Keep speakers away from directly above the microphones to reduce feedback.

Workflow 6: Surround speakers in a living-room cinema

Families who want surround sound without speakers on stands.

Connections

ConnectTo
AV receiver surround L / R terminalsTwo QS-8 in the ceiling behind or beside the sofa

Setup

  1. Choose ceiling positions to the left and right of the main seating, a little behind it.
  2. Cut the holes and run cable from the receiver.
  3. Fit and connect the speakers.
  4. Set the surround speakers in the receiver and balance their level with the fronts.

Tip: Use the same QS-8 for surrounds and heights so the sound stays consistent overhead.

Request a Quote

TONEWINNER QS-8

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›