FYNE AUDIO FA502iC product guide and data sheet cover
‹
FYNE AUDIO FA502iC product guide and data sheet coverFYNE AUDIO FA502iC data sheet page 2: F500 Series sound in the ceilingFYNE AUDIO FA502iC data sheet page 3: Point source technologyFYNE AUDIO FA502iC data sheet page 4: The crossoverFYNE AUDIO FA502iC data sheet page 5: Easy to installFYNE AUDIO FA502iC data sheet page 6: Self-aligning clampsFYNE AUDIO FA502iC data sheet page 7: ApplicationsFYNE AUDIO FA502iC data sheet page 8: Paintable grillesFYNE AUDIO FA502iC data sheet page 9: Specifications
›

Brand: FYNE AUDIO

FYNE AUDIO FA502iC

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: FA500iC SERIES

Fyne Audio FA502iC: 8-inch IsoFlare point source in-ceiling / in-wall speaker, titanium compression tweeter, 120.5 mm depth, paintable grilles. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

System type2 way IsoFlare loudspeaker for in ceiling or in wall application
Frequency response (-6 dB, typical in room)35 Hz - 34 kHz
Sensitivity (2.83 V @ 1 m)91 dB
Nominal impedance8 Ω

Power

Recommended amplifier power30 - 150 W RMS
Power handling, continuous75 W RMS
Power handling, peak300 W

Drivers and crossover

Drive unit complement1 × 200 mm (8 in) IsoFlare point source driver, multi-fibre bass / midrange cone, FyneFlute surround with 25 mm titanium dome compression tweeter
Crossover frequency1.7 kHz
Crossover typePassive 2nd order low pass, 1st order high pass

Installation

Dimensions (diameter × depth)273 × 123 mm (10.6 × 4.8 in)
Cut-out diameter248 mm (9.8 in)
Depth behind mounting surface120.5 mm (4.7 in)
Clamp travel5 - 50 mm (0.2 - 2.0 in)
Suggested minimum volume18 L
Round grille diameter281 mm (11.1 in)
Square grille dimensions281 × 281 mm (11.1 × 11.1 in)
Net weight (each)2.5 kg (5.5 lb)

Versions

F80000300Round Grille
F80000300-squareSquare Grille

Product overview

The Fyne Audio FA502iC brings true audiophile performance to home install design: an in-ceiling / in-wall loudspeaker built around the F500 Series 200 mm (8-inch) IsoFlare point source driver with a 25 mm titanium dome compression tweeter, an infinite-baffle tuned crossover and a full-range 360-degree isotropic dispersion pattern.

The FA502iC is the 8-inch model of the FA500iC Series, Fyne Audio's flagship home install range, designed around the same IsoFlare drivers as the F500 free-standing loudspeakers. It delivers the detail, impact and imaging of those speakers with high efficiency and high power handling, giving a rich, detailed sound with a wide soundstage and perfect time alignment across the frequency spectrum.

At its heart is the IsoFlare point source driver: a highly rigid 25 mm titanium dome compression tweeter set at the centre of a multi-fibre bass / midrange cone with FyneFlute roll surround. The design ensures constant directivity of the wave front, giving outstanding imaging even well off-axis. In a ceiling, the radial dispersion pattern keeps the output equally refined in front of, behind or to the side of the speaker; in a wall, the wide imaging and detail suit high-performance stereo and multi-channel systems.

The crossover is based on the F500 Series design and uses low-loss laminated core inductors and high-grade polyester capacitors exclusively, tuned for a flush-fit location. The result is an exceptionally clean signal path with very low crossover losses. With 91 dB sensitivity (2.83 V @ 1 m), 8 Ω nominal impedance and power handling of 75 W continuous and 300 W peak, the FA502iC is efficient and dynamic.

Installation is simple: self-aligning clamps fit the speaker into a 248 mm cut-out, a clear cut-out template is supplied, and spring clamp cable terminals make connection easy. Both round and square low-profile magnetic grilles are supplied; they are fully paintable and enhanced with an acoustic scrim cloth so the FA502iC blends seamlessly into the home décor.

Frequency response (-6 dB, in room) 35 Hz - 34 kHz
IsoFlare point source driver 200 mm
Sensitivity (2.83 V @ 1 m) 91 dB
Depth behind mounting surface 120.5 mm

Key features

  • 2-way IsoFlare loudspeaker for in-ceiling or in-wall application
  • 200 mm (8-inch) IsoFlare point source driver with multi-fibre bass / midrange cone and FyneFlute surround
  • 25 mm titanium dome compression tweeter at the heart of the cone
  • Constant directivity and outstanding imaging even well off-axis
  • Crossover based on the F500 Series, low-loss laminated core inductors and polyester capacitors
  • Sensitivity: 91 dB (2.83 V @ 1 m), nominal impedance 8 Ω
  • Power handling: 75 W continuous, 300 W peak
  • Shallow: 120.5 mm depth behind the mounting surface
  • Large self-aligning clamps, 5 - 50 mm clamp travel
  • Gold-plated spring clip terminals
  • Round and square low-profile magnetic grilles, fully paintable, with cloth scrim

Made for

  • High-performance stereo music in the ceiling or wall
  • 5.1 home theatre channels, or an additional FX channel on the ceiling
  • Multi-zone background music with a multi-zone amplifier
  • Ceilings, false walls and hollow walls

In the box

  • 1 × 8-inch IsoFlare loudspeaker
  • 1 × round grille
  • 1 × square grille
  • 1 × mounting template

Connections

  • Two gold-plated spring clip speaker terminals (positive and negative)

Finishes

  • Round grille: low-profile magnetic grille, fully paintable, with cloth scrim
  • Square grille: low-profile magnetic grille, fully paintable, with cloth scrim

Fyne Audio FA502iC: frequently asked questions

What makes the FA502iC different from a typical ceiling speaker?

It uses Fyne Audio's IsoFlare point source driver, with the titanium dome compression tweeter at the heart of the bass / midrange cone. That gives constant directivity and outstanding imaging even well off-axis, so the sound stays refined around the room.

Can the FA502iC be installed in a wall?

Yes. It is designed for in-ceiling or in-wall application and installs in a wide variety of ceilings and false or hollow walls with its self-aligning clamps.

What size hole and depth does it need?

The cut-out diameter is 248 mm and the depth behind the mounting surface is 120.5 mm. Clamp travel is 5 - 50 mm and the suggested minimum enclosure volume is 18 L.

Which grilles come with it?

Fyne Audio states that the FA502iC is supplied with both round and square low-profile magnetic grilles. Both are fully paintable and have a cloth scrim to help them blend into light-coloured ceilings and walls.

Is it good for home theatre?

Yes. The point source driver articulates fine movie detail with pinpoint accuracy, and high efficiency and power handling give a dynamic, lifelike performance as a 5.1 channel or an additional FX channel on the ceiling.

Where can I buy the Fyne Audio FA502iC in India?

The Fyne Audio FA502iC is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: In-ceiling stereo for a living room

Music lovers who want hi-fi quality stereo without speakers on the floor.

Connections

ConnectTo
Stereo amplifier left output (30 - 150 W RMS)FA502iC left spring terminals
Stereo amplifier right outputFA502iC right spring terminals

Setup

  1. Place the two speakers to suit the primary listening area, as in a typical 2-channel layout.
  2. Check for joists, pipes and cables with a stud locator, then fix the template and cut the 248 mm holes with a keyhole saw.
  3. Connect good quality speaker cable to the spring terminals, positive to positive and negative to negative.
  4. Turn the clamps fully inwards, fit the speaker and tighten the four clamp screws gently.
  5. Snap on the round or square grille.

Tip: The IsoFlare's constant directivity keeps the image stable even for listeners well off-axis.

Workflow 2: 5.1 home theatre with ceiling surrounds

Living-room home theatres that want discreet, detailed surround channels.

Connections

ConnectTo
AV receiver surround left / right outputsFA502iC in the ceiling or side walls

Setup

  1. Position the surround speakers around the seating, as in a typical 5.1 layout.
  2. Install them with the cut-out template and self-aligning clamps.
  3. Connect the speaker cables to the gold-plated spring terminals.
  4. Run the AV receiver's speaker set-up and set levels.

Tip: The radial dispersion keeps the sound refined in front of, behind and to the side of a ceiling speaker.

Workflow 3: Additional FX channels on the ceiling

Home theatres adding effects channels above the listeners.

Connections

ConnectTo
AV receiver additional speaker outputsFA502iC in the ceiling

Setup

  1. Choose ceiling positions above the seating for the effects channels.
  2. Cut the openings and fit the speakers with the clamps.
  3. Assign the outputs in the AV receiver.
  4. Calibrate the levels so effects move smoothly around the room.

Tip: High efficiency and power handling give dynamic, lifelike effects at film levels.

Workflow 4: Multi-zone background music

Homes that want natural-sounding music in several rooms.

Connections

ConnectTo
Multi-zone amplifier zone outputsFA502iC pairs in each room

Setup

  1. Plan a pair of FA502iC for each zone.
  2. Run speaker cable from each room to the amplifier location, allowing enough length to fit or remove the speakers.
  3. Install the speakers and connect each pair to its zone output.
  4. Set each zone for background level, or turn it up when wanted.

Tip: Local regulations may require low smoke and / or halogen-free cable in ceilings.

Workflow 5: In-wall stereo in a hollow wall

Rooms where the speakers should sit in the wall either side of a TV or seating area.

Connections

ConnectTo
Amplifier speaker outputsFA502iC in the wall

Setup

  1. Check that the wall cavity gives at least 120.5 mm depth and about 18 L of volume.
  2. Cut the 248 mm openings with the template and fit the speakers with the clamps (5 - 50 mm board thickness).
  3. Connect the cables to the spring terminals.
  4. Fit the square grille for a neat look in a wall, or the round grille.

Tip: In-wall, the wide imaging and detail suit high-performance stereo and multi-channel systems.

Workflow 6: Painting grilles to match the décor

Interiors where the speakers should disappear into a coloured ceiling or wall.

Connections

ConnectTo
Magnetic grilleFA502iC baffle

Setup

  1. Carefully remove the scrim material from the rear of the grille.
  2. Paint the grille by brush or aerosol in several thin coats, keeping the perforations clear.
  3. Re-apply the scrim with a light coating of aerosol fabric adhesive.
  4. Offer the grille up to the speaker and let the magnets snap it into position.

Tip: The cloth scrim helps the grille blend into light-coloured walls and ceilings.

Request a Quote

FYNE AUDIO FA502iC

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›