










JVC DLA-NZ500
PRICE ON ENQUIRY
JVC DLA-NZ500 compact native 4K D-ILA laser projector: three D-ILA devices, 2,000 lm, 40,000:1 native contrast, 80 mm motorised lens. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Device
| Technology | D-ILA |
| Device | 0.69-inch native 4K D-ILA device |
| Number of devices | 3 |
| Native resolution | 4096 x 2160 |
| Display resolution | 4096 x 2160 |
Light source
| Type | BLU-Escent laser diode |
| Life time (standard mode) | 20,000 hours |
Picture
| Brightness | 2,000 lm |
| Native contrast | 40,000:1 |
| Dynamic contrast | ∞:1 |
| Dynamic light power control | Yes: Low, High, Balance, Off |
| Manual aperture | Yes: -15 (stops down) to 0 (opens up) |
| 100 % Rec. 709 | Yes |
| Colour bit depth | 12-bit |
| Professional calibration controls | Yes, certified calibration controls mode |
HDR
| HDR10 / HDR10+ / HLG | Yes / Yes / Yes |
| Frame Adapt HDR | Yes |
| Mastering info display | Yes: MaxCLL, MaxFALL, DML |
| Deep Black Tone Control | Yes |
Lens
| Zoom | 1.6x, motorised |
| Throw ratio | 1.34 - 2.14 (16:9); 1.26 - 2.01 (17:9) |
| Lens diameter | 80 mm |
| Build | 15 elements in 11 groups |
| Lens shift | Motorised; horizontal ±28 %, vertical ±70 % |
| Motorised focus | Yes |
| Projection size (diagonal) | 60 - 200 inch |
| Lens memory | Yes, 5 user presets |
| Lens cover | Yes |
HDMI
| Inputs | 2 |
| Data rate | 32 Gbps |
| HDCP version | 2.3 |
| 4K60p input | Yes |
| Video signal range | 480p, 576p, 720p 60/50, 1080p 60/50/30/25/24, 3840 x 2160p 60/50/30/25/24, 4096 x 2160p 60/50/30/25/24 |
| PC signal range | 640 x 480, 800 x 600, 2048 x 1080, 1600 x 1200, 1920 x 1200, 2048 x 1536, 2560 x 1440 |
| Input level adjustment | Auto, Standard (16-235), Enhanced (0-255), Super White (16-255) |
| Colour space range | Auto, YCbCr444, YCbCr422, RGB |
| EDID modes | Standard, Option1, Option2 (older hardware may need Option1 or Option2) |
Connections
| LAN | RJ-45 |
| Service | USB Type A, for firmware update or backup |
Picture settings
| Picture modes | Natural, Cinema, Vivid, Frame Adapt HDR1, Frame Adapt HDR2, HDR10+, HLG, a filmmaker-intent mode (SDR and HDR10), 4 User modes |
| Colour temperatures | 5500K, 6500K, 7500K, 9300K, High Bright, HDR10+, HDR10, HLG, Custom 1, Custom 2 |
| Gamma processing depth | 12-bit |
| Gamma | HDR (Auto), HDR (PQ), HDR (HLG), 2.2, 2.4, 2.6, Cinema 1, Cinema 2, Vivid, 3 Custom modes |
| Colour management | 6-axis adjustable CMS |
| MPC | Yes |
| Filmmaker-intent picture mode | Yes |
| Auto Calibration | Yes |
| Installation Mode | 5 modes: Lens Control, Pixel Adjustment, Mask, Anamorphic on or off, Screen Adjust, Installation Style, Keystone, Aspect |
| Anamorphic modes | 4 (A, B, C, D) |
| Network discovery for home-automation systems | Yes |
Power and environment
| Power requirement | AC 100-240 V, 50/60 Hz |
| Power consumption | 280 W |
| Standby | Eco mode 0.3 W; network standby 1.5 W (LAN) |
| Switchover time | Approx. 15 min (to standby or networked standby; default) |
| Fan noise | 23 dB |
| Eco mode / standby timer | Yes / Yes |
| Operating temperature | 5 °C to 35 °C |
| Operating humidity | 20 % to 80 % |
| Installation angle | Horizontal ±10°, vertical ±10° |
| Installation altitude | Below 2,000 m |
In the box
| Remote control | RM-MH27 |
| Batteries | 2 x AAA |
| Also included | Power cord, quick guide, lens cover (attached) |
Dimensions and weight
| Dimensions (W x H x D) | 450 x 181 x 479 mm |
| Weight | 14.6 kg |
| Package (W x H x D) | 585 x 361 x 600 mm |
| Package weight | 18.9 kg |
Versions
| DLA-NZ500 | Black |
| DLA-NZ500W | White |
Product overview
The JVC DLA-NZ500 is a compact native 4K D-ILA laser projector: three 0.69-inch native 4K D-ILA devices, a 2,000-lumen BLU-Escent laser and a newly designed 80 mm motorised lens deliver 40,000:1 native contrast from a body 35 % smaller in volume than the previous DLA-NZ7.
For this generation JVC redesigned every major component: the optical unit, the lens and the circuit board. The result keeps a laser light source and native 4K D-ILA devices in a body with 35 % less volume than the DLA-NZ7. The heat exhaust now sits at the rear, so warm air cannot disturb the image on the screen, which gives more freedom in where the projector goes, and the new design uses significantly less plastic, which also reduces transport costs.
JVC's own 0.69-inch native 4K D-ILA device, with 4096 x 2160 pixels, has been advanced to further enhance black detail. Better alignment control and pixel flatness give 40,000:1 native contrast, with ∞:1 dynamic contrast, and an improved manufacturing process gives uniform brightness to every corner of the screen. The BLU-Escent light source uses a blue laser diode: 2,000 lumens, a laser life of about 20,000 hours and roughly twice the brightness per watt of effective power of the DLA-Z1, the first BLU-Escent model. Light Source Control sets the luminance in 101 steps.
The newly designed large-aperture 4K lens, 80 mm across with 15 elements in 11 groups, carries full native 4K resolution to every corner of the screen. Zoom (1.6x), focus and shift are fully motorised, and the lens shift of ±70 % vertical and ±28 % horizontal makes installation easy, for screens of 60 to 200 inches. Five Installation Mode memories store lens control, mask, aspect and other settings for instant recall.
For HDR the DLA-NZ500 supports HDR10, HDR10+ and HLG. Gen2 Frame Adapt HDR analyses HDR10 content frame by frame and tone-maps it in real time, using DML and MaxCLL metadata, and Deep Black Tone Control deepens dark tones for more realistic night scenes. Vivid mode shows SDR content in rich colour, 100 % Rec. 709 is covered, and a 6-axis colour management system, Auto Calibration and professional calibration controls make it ready for an accurate home cinema, with a quiet 23 dB fan.
| Native 4K, three 0.69-inch D-ILA devices | 4096 x 2160 |
| BLU-Escent laser, about 20,000 hours | 2,000 lm |
| Native contrast; dynamic contrast ∞:1 | 40,000:1 |
| Less volume than the previous DLA-NZ7 | 35 % |
Key features
- Three 0.69-inch native 4K D-ILA devices: 4096 x 2160 pixels
- Native contrast 40,000:1, dynamic contrast ∞:1, uniform brightness to every corner
- BLU-Escent laser: 2,000 lm, about 20,000 hours, Light Source Control in 101 steps
- Newly designed 80 mm lens, 15 elements in 11 groups, 1.6x zoom
- Fully motorised zoom, focus and shift: ±70 % vertical, ±28 % horizontal
- Compact redesign: 35 % less volume than the DLA-NZ7, heat exhaust at the rear
- HDR10, HDR10+ and HLG; Gen2 Frame Adapt HDR with Deep Black Tone Control
- Vivid picture mode for SDR content; 100 % Rec. 709; 12-bit colour
- Two HDMI inputs, 32 Gbps, HDCP 2.3, 4K60p
- Auto Calibration with an optional sensor, 6-axis colour management, professional calibration controls
- Five Installation Mode memories, four anamorphic modes and USB settings backup
- 23 dB fan noise; 280 W power consumption
Installation
With a throw ratio of 1.34 to 2.14:1 (16:9), a 100-inch 16:9 screen fills from about 2.98 m to 4.79 m and a 120-inch screen from about 3.58 m to 5.76 m. Air is drawn in at the front and exhausted at the rear, so the front area must stay unblocked. Removing the four feet exposes mounting holes for a ceiling-mount bracket (M5 screws, 20 to 25 mm), and the feet adjust the height and angle by up to 10 mm.
Made for
- Home cinemas and living rooms with screens from 60 to 200 inches
- 4K HDR films and series from disc players, streamers and media servers
- Compact shelf or ceiling installations where space is limited
- Scope screens with an optional anamorphic lens
- Calibrated set-ups and control over the network
In the box
- DLA-NZ500 projector with lens cover (attached at shipment)
- Remote control RM-MH27
- 2 x AAA batteries
- Power cord
- Quick guide, safety precautions and warranty card
Connections
- 2 x HDMI input (HDMI 1, HDMI 2): 32 Gbps, HDCP 2.3
- LAN: RJ-45, 10BASE-T/100BASE-TX, for control from a PC or control system
- Service: USB Type A, for software updates and settings backup
- AC power inlet
Finishes
- Black: DLA-NZ500
- White: DLA-NZ500W
JVC DLA-NZ500: frequently asked questions
Is the DLA-NZ500 native 4K?
Yes. It uses three 0.69-inch native 4K D-ILA devices of 4096 x 2160 pixels, one for each primary colour, and displays 4096 x 2160.
How bright is it?
The BLU-Escent laser gives 2,000 lumens, with a laser life expectancy of about 20,000 hours. Light Source Control adjusts the luminance in 101 steps to suit the room and screen.
How far from the screen should it be placed?
With the 1.6x zoom, a 100-inch 16:9 screen needs about 2.98 m (wide) to 4.79 m (tele) and a 150-inch screen about 4.49 m to 7.21 m. The projection size range is 60 to 200 inches.
How is it different from the DLA-NZ700?
Both share the compact body, the 80 mm motorised lens, two HDMI inputs and Gen2 Frame Adapt HDR. The DLA-NZ700 adds the third-generation D-ILA device with 80,000:1 native contrast (DLA-NZ500: 40,000:1), 2,300 lumens (DLA-NZ500: 2,000 lumens) and a cinema filter for a DCI-P3 wide colour gamut. The DLA-NZ500 is also offered in white (DLA-NZ500W).
Which HDR formats are supported?
HDR10, HDR10+ and HLG. Frame Adapt HDR analyses each frame of HDR10 content and adjusts the tone mapping automatically, and Deep Black Tone Control deepens dark scenes.
Where can I buy the JVC DLA-NZ500 in India?
The JVC DLA-NZ500 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Living-room cinema on a rear shelf
Families who want a big picture in the living room without a dedicated room.
Connections
| Connect | To |
|---|---|
| Disc player or streamer (HDMI out) | AV receiver or soundbar system HDMI input |
| AV receiver HDMI output | DLA-NZ500 HDMI 1 |
Setup
- Place the projector on a sturdy rear shelf, level within ±10°, with the front air inlets unblocked and space behind for the rear exhaust.
- Use the 1.6x zoom to fit the screen: a 100-inch 16:9 screen from about 2.98 m to 4.79 m.
- Use lens shift (up to ±70 % vertical) to place the image without tilting the projector.
- Choose Vivid mode for SDR viewing in a slightly bright room, or Cinema for films.
Tip: Set Installation Style and store the set-up in one of the five Installation Mode memories.
Workflow 2: Dedicated room for 4K HDR films
Enthusiasts with a dark, dedicated home cinema.
Connections
| Connect | To |
|---|---|
| 4K disc player or streamer (HDMI out) | AV receiver HDMI input |
| AV receiver HDMI output | DLA-NZ500 HDMI 1 |
| AV receiver | Surround and height speakers |
Setup
- Select Frame Adapt HDR 1 or Frame Adapt HDR 2 for HDR10 titles; HDR10+ and HLG titles use their own modes.
- Turn on Deep Black Tone Control for night scenes.
- Use the 6-axis colour management system to fine-tune hue, saturation and intensity.
- Adjust Light Source Control (101 steps) to the screen and room.
Tip: The projector shows the MaxCLL, MaxFALL and DML of each HDR title.
Workflow 3: Ceiling mount with lens shift
Rooms where the projector hangs from the ceiling above the seats.
Connections
| Connect | To |
|---|---|
| Ceiling bracket | DLA-NZ500 foot mounting holes (M5 screws, 20 to 25 mm) |
| HDMI cable from the AV receiver | DLA-NZ500 HDMI 1 |
Setup
- Remove the four feet and fix the projector to a bracket rated above its 14.6 kg weight.
- Set Installation Style to Ceiling Mount (F).
- Press LENS CONTROL on the remote and shift the image (up to ±70 % vertical, ±28 % horizontal).
- Focus and zoom with the motorised lens, then save the set-up.
Tip: Use an Ultra High Speed HDMI cable for a reliable signal over a long run.
Workflow 4: Scope screen with an anamorphic lens
Cinema rooms with a 2.35:1 screen.
Connections
| Connect | To |
|---|---|
| Optional anamorphic lens | In front of the DLA-NZ500 lens |
| Disc player (HDMI out) | DLA-NZ500 HDMI 1 |
Setup
- Fit the optional anamorphic lens.
- Choose Anamorphic mode A, B, C or D to suit the lens.
- Set Mask and Aspect for the 2.35:1 screen.
- Store the scope set-up and a 16:9 set-up as separate Installation Mode memories.
Tip: SETTING MEMORY on the remote opens the Installation Mode list.
Workflow 5: Auto Calibration
Enthusiasts and calibration professionals.
Connections
| Connect | To |
|---|---|
| Optional optical sensor | PC with JVC calibration software |
| PC (network) | DLA-NZ500 LAN (RJ-45) |
Setup
- Set a network password on the projector and connect it to the network.
- Download the calibration software from the JVC website and connect the sensor.
- Run Auto Calibration to optimise colour balance, gamma, colour space and colour tracking.
- Refine with the 6-axis colour management system and save to a User mode.
Tip: Professional calibration controls let a trained calibrator store settings securely in the projector.
Workflow 6: Network control and settings backup
Homes with a central control system and the people who install it.
Connections
| Connect | To |
|---|---|
| Home-automation controller or PC | DLA-NZ500 LAN (RJ-45) |
| USB flash drive | DLA-NZ500 SERVICE terminal |
Setup
- Set the network password, then connect the LAN terminal to the home network.
- Add the projector to the control system; network discovery support helps it find the projector.
- Set ECO Mode to Off if the projector must respond in standby.
- Back up all menu settings to a USB flash drive through the SERVICE terminal.
Tip: USB Back-up restores an installer's settings after unintended changes.








