JVC DLA-NZ700 product guide and data sheet cover
‹
JVC DLA-NZ700 product guide and data sheet coverJVC DLA-NZ700 data sheet page 2: Compact by designJVC DLA-NZ700 data sheet page 3: Third-generation native 4K D-ILAJVC DLA-NZ700 data sheet page 4: High native contrastJVC DLA-NZ700 data sheet page 5: BLU-Escent laserJVC DLA-NZ700 data sheet page 6: Newly designed 4K lensJVC DLA-NZ700 data sheet page 7: Installation flexibilityJVC DLA-NZ700 data sheet page 8: HDR and colourJVC DLA-NZ700 data sheet page 9: Set-up and placementJVC DLA-NZ700 data sheet page 10: Connections and specifications
›

Brand: JVC

JVC DLA-NZ700

PRICE ON ENQUIRY

Category: Home Theatre Projectors | Series: D-ILA

JVC DLA-NZ700 compact native 4K D-ILA laser projector: three Gen3 devices, 2,300 lm, 80,000:1 native contrast, 80 mm motorised lens. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Device

TechnologyD-ILA
Device3rd generation 0.69-inch native 4K D-ILA device
Number of devices3
Native resolution4096 x 2160
Display resolution4096 x 2160

Light source

TypeBLU-Escent laser diode
Life time (standard mode)20,000 hours

Picture

Brightness2,300 lm
Native contrast80,000:1
Dynamic contrast∞:1
Dynamic light power controlYes: Low, High, Balance, Off
Manual apertureYes: -15 (stops down) to 0 (opens up)
DCI-P3 colour gamutYes
100 % Rec. 709Yes
Colour bit depth12-bit
Professional calibration controlsYes, certified calibration controls mode

HDR

HDR10 / HDR10+ / HLGYes / Yes / Yes
Frame Adapt HDRYes
Mastering info displayYes: MaxCLL, MaxFALL, DML
Deep Black Tone ControlYes

Lens

Zoom1.6x, motorised
Throw ratio1.34 - 2.14 (16:9); 1.26 - 2.01 (17:9)
Lens diameter80 mm
Build15 elements in 11 groups
Lens shiftMotorised; horizontal ±28 %, vertical ±70 %
Motorised focusYes
Projection size (diagonal)60 - 200 inch
Lens memoryYes, 5 user presets
Lens coverYes

HDMI

Inputs2
Data rate32 Gbps
HDCP version2.3
4K60p inputYes
Video signal range480p, 576p, 720p 60/50, 1080p 60/50/30/25/24, 3840 x 2160p 60/50/30/25/24, 4096 x 2160p 60/50/30/25/24
PC signal range640 x 480, 800 x 600, 2048 x 1080, 1600 x 1200, 1920 x 1200, 2048 x 1536, 2560 x 1440
Input level adjustmentAuto, Standard (16-235), Enhanced (0-255), Super White (16-255)
Colour space rangeAuto, YCbCr444, YCbCr422, RGB
EDID modesStandard, Option1, Option2 (older hardware may need Option1 or Option2)

Connections

LANRJ-45
ServiceUSB Type A, for firmware update or backup

Picture settings

Picture modesNatural, Cinema, Vivid, Frame Adapt HDR1, Frame Adapt HDR2, HDR10+, HLG, a filmmaker-intent mode (SDR and HDR10), 4 User modes
Colour temperaturesXenon 1, Xenon 2, 5500K, 6500K, 7500K, 9300K, High Bright, HDR10+, HDR10, HLG, Custom 1, Custom 2
Gamma processing depth12-bit
GammaHDR (Auto), HDR (PQ), HDR (HLG), 2.2, 2.4, 2.6, Cinema 1, Cinema 2, Vivid, 3 Custom modes
Colour management6-axis adjustable CMS
MPCYes
Filmmaker-intent picture modeYes
Auto CalibrationYes
Installation Mode5 modes: Lens Control, Pixel Adjustment, Mask, Anamorphic on or off, Screen Adjust, Installation Style, Keystone, Aspect
Anamorphic modes4 (A, B, C, D)
Network discovery for home-automation systemsYes

Power and environment

Power requirementAC 100-240 V, 50/60 Hz
Power consumption280 W
StandbyEco mode 0.3 W; network standby 1.5 W (LAN)
Switchover timeApprox. 15 min (to standby or networked standby; default)
Fan noise23 dB
Eco mode / standby timerYes / Yes
Operating temperature5 °C to 35 °C
Operating humidity20 % to 80 %
Installation angleHorizontal ±10°, vertical ±10°
Installation altitudeBelow 2,000 m

In the box

Remote controlRM-MH27
Batteries2 x AAA
Also includedPower cord, quick guide, lens cover (attached)

Dimensions and weight

Dimensions (W x H x D)450 x 181 x 479 mm
Weight14.8 kg
Package (W x H x D)585 x 361 x 600 mm
Package weight18.9 kg

Product overview

The JVC DLA-NZ700 is a compact native 4K D-ILA laser projector: three third-generation 0.69-inch D-ILA devices, a 2,300-lumen BLU-Escent laser and a newly designed 80 mm motorised lens deliver 80,000:1 native contrast from a body 35 % smaller in volume than the previous DLA-NZ7.

For this generation JVC redesigned every major component: the optical unit, the lens and the circuit board. The result keeps a laser light source and native 4K D-ILA devices in a body with 35 % less volume than the DLA-NZ7. The heat exhaust now sits at the rear, so warm air cannot disturb the image on the screen, which gives more freedom in where the projector goes, and the new design uses significantly less plastic, which also reduces transport costs.

JVC's own 0.69-inch native 4K D-ILA device, with 4096 x 2160 pixels, is now in its third generation. Better alignment control and pixel flatness enhance black detail and lift native contrast to 80,000:1, with ∞:1 dynamic contrast, and an improved manufacturing process gives uniform brightness to every corner of the screen. The BLU-Escent light source uses a blue laser diode: 2,300 lumens, a laser life of about 20,000 hours and roughly twice the brightness per watt of effective power of the DLA-Z1, the first BLU-Escent model. Light Source Control sets the luminance in 101 steps.

The newly designed large-aperture 4K lens, 80 mm across with 15 elements in 11 groups, carries full native 4K resolution to every corner of the screen. Zoom (1.6x), focus and shift are fully motorised, and the lens shift of ±70 % vertical and ±28 % horizontal makes installation easy, for screens of 60 to 200 inches. Five Installation Mode memories store lens control, mask, aspect and other settings for instant recall.

For HDR the DLA-NZ700 supports HDR10, HDR10+ and HLG. Gen2 Frame Adapt HDR analyses HDR10 content frame by frame and tone-maps it in real time, using DML and MaxCLL metadata, and Deep Black Tone Control deepens dark tones for more realistic night scenes. A cinema filter gives a wide colour gamut equivalent to DCI-P3, Vivid mode shows SDR content in rich colour, and a 6-axis colour management system, Auto Calibration and professional calibration controls make it ready for an accurate home cinema, with a quiet 23 dB fan.

Native 4K, three 0.69-inch D-ILA devices 4096 x 2160
BLU-Escent laser, about 20,000 hours 2,300 lm
Native contrast; dynamic contrast ∞:1 80,000:1
Less volume than the previous DLA-NZ7 35 %

Key features

  • Three third-generation 0.69-inch native 4K D-ILA devices: 4096 x 2160 pixels
  • Native contrast 80,000:1, dynamic contrast ∞:1, uniform brightness to every corner
  • BLU-Escent laser: 2,300 lm, about 20,000 hours, Light Source Control in 101 steps
  • Newly designed 80 mm lens, 15 elements in 11 groups, 1.6x zoom
  • Fully motorised zoom, focus and shift: ±70 % vertical, ±28 % horizontal
  • Compact redesign: 35 % less volume than the DLA-NZ7, heat exhaust at the rear
  • HDR10, HDR10+ and HLG; Gen2 Frame Adapt HDR with Deep Black Tone Control
  • Cinema filter for a wide colour gamut equivalent to DCI-P3; Vivid mode for SDR
  • Two HDMI inputs, 32 Gbps, HDCP 2.3, 4K60p
  • Auto Calibration with an optional sensor, 6-axis colour management, professional calibration controls
  • Five Installation Mode memories, four anamorphic modes and USB settings backup
  • 23 dB fan noise; 280 W power consumption

Installation

With a throw ratio of 1.34 to 2.14:1 (16:9), a 100-inch 16:9 screen fills from about 2.98 m to 4.79 m and a 120-inch screen from about 3.58 m to 5.76 m. Air is drawn in at the front and exhausted at the rear, so the front area must stay unblocked. Removing the four feet exposes mounting holes for a ceiling-mount bracket (M5 screws, 20 to 25 mm), and the feet adjust the height and angle by up to 10 mm.

Made for

  • Home cinemas and living rooms with screens from 60 to 200 inches
  • 4K HDR films and series from disc players, streamers and media servers
  • Compact shelf or ceiling installations where space is limited
  • Scope screens with an optional anamorphic lens
  • Calibrated set-ups and control over the network

In the box

  • DLA-NZ700 projector with lens cover (attached at shipment)
  • Remote control RM-MH27
  • 2 x AAA batteries
  • Power cord
  • Quick guide, safety precautions and warranty card

Connections

  • 2 x HDMI input (HDMI 1, HDMI 2): 32 Gbps, HDCP 2.3
  • LAN: RJ-45, 10BASE-T/100BASE-TX, for control from a PC or control system
  • Service: USB Type A, for software updates and settings backup
  • AC power inlet

JVC DLA-NZ700: frequently asked questions

Is the DLA-NZ700 native 4K?

Yes. It uses three 0.69-inch native 4K D-ILA devices of 4096 x 2160 pixels, one for each primary colour, and displays 4096 x 2160.

How bright is it?

The BLU-Escent laser gives 2,300 lumens, with a laser life expectancy of about 20,000 hours. Light Source Control adjusts the luminance in 101 steps to suit the room and screen.

How far from the screen should it be placed?

With the 1.6x zoom, a 100-inch 16:9 screen needs about 2.98 m (wide) to 4.79 m (tele) and a 150-inch screen about 4.49 m to 7.21 m. The projection size range is 60 to 200 inches.

How is it different from the DLA-NZ500?

The DLA-NZ700 has the third-generation D-ILA device with 80,000:1 native contrast (DLA-NZ500: 40,000:1), 2,300 lumens (DLA-NZ500: 2,000 lumens) and a cinema filter for a DCI-P3 wide colour gamut, with Xenon colour temperature presets.

Which HDR formats are supported?

HDR10, HDR10+ and HLG. Frame Adapt HDR analyses each frame of HDR10 content and adjusts the tone mapping automatically, and Deep Black Tone Control deepens dark scenes.

Where can I buy the JVC DLA-NZ700 in India?

The JVC DLA-NZ700 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Living-room cinema on a rear shelf

Families who want a big picture in the living room without a dedicated room.

Connections

ConnectTo
Disc player or streamer (HDMI out)AV receiver or soundbar system HDMI input
AV receiver HDMI outputDLA-NZ700 HDMI 1

Setup

  1. Place the projector on a sturdy rear shelf, level within ±10°, with the front air inlets unblocked and space behind for the rear exhaust.
  2. Use the 1.6x zoom to fit the screen: a 100-inch 16:9 screen from about 2.98 m to 4.79 m.
  3. Use lens shift (up to ±70 % vertical) to place the image without tilting the projector.
  4. Choose Vivid mode for SDR viewing in a slightly bright room, or Cinema for films.

Tip: Set Installation Style and store the set-up in one of the five Installation Mode memories.

Workflow 2: Dedicated room for 4K HDR films

Enthusiasts with a dark, dedicated home cinema.

Connections

ConnectTo
4K disc player or streamer (HDMI out)AV receiver HDMI input
AV receiver HDMI outputDLA-NZ700 HDMI 1
AV receiverSurround and height speakers

Setup

  1. Select Frame Adapt HDR 1 or Frame Adapt HDR 2 for HDR10 titles; HDR10+ and HLG titles use their own modes.
  2. Turn on Deep Black Tone Control for night scenes.
  3. Use the cinema filter colour profiles for wide-gamut content.
  4. Adjust Light Source Control (101 steps) to the screen and room.

Tip: The projector shows the MaxCLL, MaxFALL and DML of each HDR title.

Workflow 3: Ceiling mount with lens shift

Rooms where the projector hangs from the ceiling above the seats.

Connections

ConnectTo
Ceiling bracketDLA-NZ700 foot mounting holes (M5 screws, 20 to 25 mm)
HDMI cable from the AV receiverDLA-NZ700 HDMI 1

Setup

  1. Remove the four feet and fix the projector to a bracket rated above its 14.8 kg weight.
  2. Set Installation Style to Ceiling Mount (F).
  3. Press LENS CONTROL on the remote and shift the image (up to ±70 % vertical, ±28 % horizontal).
  4. Focus and zoom with the motorised lens, then save the set-up.

Tip: Use an Ultra High Speed HDMI cable for a reliable signal over a long run.

Workflow 4: Scope screen with an anamorphic lens

Cinema rooms with a 2.35:1 screen.

Connections

ConnectTo
Optional anamorphic lensIn front of the DLA-NZ700 lens
Disc player (HDMI out)DLA-NZ700 HDMI 1

Setup

  1. Fit the optional anamorphic lens.
  2. Choose Anamorphic mode A, B, C or D to suit the lens.
  3. Set Mask and Aspect for the 2.35:1 screen.
  4. Store the scope set-up and a 16:9 set-up as separate Installation Mode memories.

Tip: SETTING MEMORY on the remote opens the Installation Mode list.

Workflow 5: Auto Calibration

Enthusiasts and calibration professionals.

Connections

ConnectTo
Optional optical sensorPC with JVC calibration software
PC (network)DLA-NZ700 LAN (RJ-45)

Setup

  1. Set a network password on the projector and connect it to the network.
  2. Download the calibration software from the JVC website and connect the sensor.
  3. Run Auto Calibration to optimise colour balance, gamma, colour space and colour tracking.
  4. Refine with the 6-axis colour management system and save to a User mode.

Tip: Professional calibration controls let a trained calibrator store settings securely in the projector.

Workflow 6: Network control and settings backup

Homes with a central control system and the people who install it.

Connections

ConnectTo
Home-automation controller or PCDLA-NZ700 LAN (RJ-45)
USB flash driveDLA-NZ700 SERVICE terminal

Setup

  1. Set the network password, then connect the LAN terminal to the home network.
  2. Add the projector to the control system; network discovery support helps it find the projector.
  3. Set ECO Mode to Off if the projector must respond in standby.
  4. Back up all menu settings to a USB flash drive through the SERVICE terminal.

Tip: USB Back-up restores an installer's settings after unintended changes.

Request a Quote

JVC DLA-NZ700

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›