LYNX LT-DANTE
PRICE ON ENQUIRY
LYNX LT-DANTE LSlot card: Dante network interface for Hilo and Aurora converters, 32 channels at 96 kHz or 16 at 192 kHz, primary and secondary ports. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please DM us or call +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our trusted payment gateway partner.
LT-DANTE
| Network | Dante audio network |
| Ports | Primary and secondary RJ45 |
| Channels | Up to 32 at 96 kHz; 16 at 192 kHz |
| Cables | Standard Cat 5 and Cat 6 |
| Latency | Extremely low |
| Compatible converters | Hilo 2, Hilo, Aurora, Aurora(n) |
Product overview
The LYNX LT-DANTE is a two-port LSlot interface card that connects Aurora and Hilo converters to a Dante audio network, with up to 32 channels at 96 kHz or 16 channels at 192 kHz.
Dante audio networking uses standard IP networks to carry high-quality, uncompressed multichannel audio with near-zero latency, so a single Ethernet cable can replace several analogue or multicore cables, and standard gigabit switches distribute signals throughout a facility. The LT-DANTE brings the uncoloured conversion of the Aurora and Hilo to live, studio, broadcast and commercial installation networks. LYNX does not restrict how you connect your devices: with the LSlot expansion port the connection can be changed whenever you need, now and when new standards become available, without replacing the whole interface.
| Channels at 96 kHz | 32 |
| Channels at 192 kHz | 16 |
| Primary and secondary ports | 2 |
| Standard network cables | Cat 5 / 6 |
Key features
- Easy connection to a Dante audio network for Hilo and Aurora converters
- Extremely low latency
- Two network ports: primary and secondary
- Uses standard Cat 5 and Cat 6 cables
- Up to 32 channels at 96 kHz, 16 channels at 192 kHz
- Designed and manufactured in the USA by LYNX
Installation
The LT-DANTE installs in any existing Hilo or Aurora with an easy and free firmware update. Dante-equipped models are also available: Hilo 2-DNT, Hilo-DNT, Aurora(n) 8 / 16 / 24 / 32-DNT and Aurora 8 / 16-DNT. Please confirm the configuration of your Aurora(n) converter when ordering an LSlot card separately.
Compatible with
- Hilo 2 and Hilo
- Aurora(n) 8, 16, 24 and 32
- Aurora 8 and Aurora 16
In the box
- LT-DANTE LSlot interface card
LYNX LT-DANTE: frequently asked questions
What network equipment is needed?
Standard Cat 5 or Cat 6 cables and network switches; gigabit switches are recommended for distributing signals through a facility.
Which ports does it have?
Two RJ45 network ports on the bracket, labelled PRI (primary) and SEC (secondary).
Where can I buy the LYNX LT-DANTE in India?
The LYNX LT-DANTE is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Converters on a facility network
Broadcast and installation systems.
Connections
| Connect | To |
|---|---|
| Network switch | LT‑DANTE PRI port |
| Second network (optional) | LT‑DANTE SEC port |
Setup
- Fit the LT-DANTE and update the firmware.
- Connect the primary port to the network.
- Patch channels with the network controller.
- Set converter routing on the front panel or NControl.
Tip: Connect the SEC port as your network design requires.
Workflow 2: Replacing multicore cables
Live and studio systems spanning several rooms.
Connections
| Connect | To |
|---|---|
| Stage converter | Network port |
| Control room converter | Network port |
Setup
- Place a converter at each location.
- Link them with one Ethernet cable each.
- Route the channels across the network.
- Monitor levels on each converter.
Tip: One cable carries up to 32 channels at 96 kHz.
