TONEWINNER QS-6.1 product guide and data sheet cover
‹
TONEWINNER QS-6.1 product guide and data sheet coverTONEWINNER QS-6.1 data sheet page 2: Slim QS series design
›

Brand: TONEWINNER

TONEWINNER QS-6.1

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: QS SERIES

Tonewinner QS-6.1 slim two-way wall-mounted home theatre speaker: 1" tweeter + 6.5" mid-bass, 60 W rated, 88 dB, 50 Hz - 20 kHz, 8 Ω. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

ModelQS-6.1
SeriesQS series
TypeTwo-way wall-mounted home theatre speaker

Drivers

Tweeter1" × 1
Mid-bass6.5" × 1, custom-made

Acoustic performance

Sensitivity88 dB
Frequency range50 Hz - 20 kHz
Rated impedance8 Ω
Rated power60 W

Physical

Size219 × 319 × 127 mm (± 2 mm)
Install hole size212 × 312 × 145 mm
Net weight3.9 kg per piece
Package size338 × 375 × 285 mm (± 5 mm), one pair

Product overview

The Tonewinner QS-6.1 is a slim two-way wall-mounted home theatre speaker from the QS series, pairing a 1-inch tweeter with a 6.5-inch custom-made mid-bass unit in a cabinet only 127 mm deep.

The QS series was designed to be thin and light, simple and fashionable, so that the speakers blend into the decoration of the room instead of standing out in it. The QS-6.1 measures 219 × 319 × 127 mm and is fitted into an install hole of 212 × 312 × 145 mm, so most of the cabinet sits inside the wall and only the slim front with its grille remains in view.

Inside, a 1-inch high-quality tweeter gives a transparent, bright treble with natural and delicate high-frequency extension. The 6.5-inch custom-made mid-bass unit keeps the midrange clear and layered, while the bass is calm and powerful with good depth. Tonewinner describes the series as stable in performance, with elastic low frequencies, good transient response, a clear sound texture and a warm, mellow tone.

The QS-6.1 has a frequency range of 50 Hz - 20 kHz, a sensitivity of 88 dB and a rated impedance of 8 Ω, with a rated power of 60 W. That makes it an easy load for an AV receiver or stereo amplifier, whether it is used as a front, centre or surround speaker in a home theatre or for music in a living room.

In the QS range it is the compact model: the larger QS-6.2 shares the same slim styling, and the QS-6+ is the series' 6-inch coaxial ceiling speaker, so a whole room can be built with one look.

tweeter and mid-bass 1" + 6.5"
rated power 60 W
frequency range 50 Hz - 20 kHz
cabinet depth 127 mm

Key features

  • Two-way design with a 1-inch high-quality tweeter and a 6.5-inch custom-made mid-bass unit
  • Transparent, bright treble with natural and delicate high-frequency extension
  • Clear, layered midrange with calm, powerful and deep bass
  • Thin, light cabinet, 219 × 319 × 127 mm, that blends with the decoration
  • Install hole size 212 × 312 × 145 mm for wall mounting
  • Rated power 60 W, rated impedance 8 Ω
  • Sensitivity 88 dB
  • Frequency range 50 Hz - 20 kHz
  • Stable performance, low distortion, good transient response and warm, mellow tone
  • Matches the styling of the other QS series wall and ceiling speakers

Made for

  • Home theatre systems where the speakers are built into the walls
  • Front, centre and surround channels with an AV receiver
  • Living rooms and bedrooms where speakers should blend with the décor
  • Background and foreground music in homes

In the box

  • QS-6.1 wall-mounted speaker

Tonewinner QS-6.1: frequently asked questions

Is the QS-6.1 an in-wall speaker?

Yes. It is a wall-mounted speaker that fits an install hole of 212 × 312 × 145 mm. The cabinet measures 219 × 319 × 127 mm, so it sits slim and neat in the wall.

Which drivers does it use?

A 1-inch high-quality tweeter for transparent, bright treble and a 6.5-inch custom-made mid-bass unit for a clear midrange and calm, powerful bass.

What amplifier does it need?

Any AV receiver or stereo amplifier that works with 8 Ω speakers. The QS-6.1 has a rated power of 60 W and a sensitivity of 88 dB.

How deep does it go in the bass?

The published frequency range is 50 Hz - 20 kHz. For deep cinema effects in a home theatre, add a subwoofer to the system.

Can I use it as a surround speaker?

Yes. The QS series is made for home theatre use, and its slim, light cabinet suits front, centre and surround positions alike.

Where can I buy the Tonewinner QS-6.1 in India?

The Tonewinner QS-6.1 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: 5.1 living-room home theatre in the walls

Families who want cinema sound around the TV without floor-standing boxes.

Connections

ConnectTo
AV receiver front L / R speaker terminalsTwo QS-6.1 beside the TV
AV receiver centre speaker terminalsQS-6.1 above or below the TV
AV receiver surround speaker terminalsTwo QS-6.1 on the side or rear walls
AV receiver subwoofer pre-outPowered subwoofer

Setup

  1. Mark the positions and cut install holes of 212 × 312 × 145 mm in the walls.
  2. Run speaker cable from the receiver location to each hole before fitting the speakers.
  3. Fit the five QS-6.1 speakers and connect each one with the correct polarity.
  4. Set all speakers to 8 Ω and small in the receiver's set-up menu, with the subwoofer handling the low bass.
  5. Run the receiver's calibration or set distances and levels by hand, then play a film.

Tip: Using the same QS-6.1 at all five positions keeps the tone identical as sound moves around the room.

Workflow 2: Stereo music in the living room

Music lovers who want clean walls and real stereo.

Connections

ConnectTo
Stereo amplifier L / R speaker outputsTwo QS-6.1 in the front wall
Streamer or CD playerStereo amplifier input

Setup

  1. Place the two speakers at ear height either side of the listening area, roughly as far apart as you sit from them.
  2. Cut the 212 × 312 × 145 mm install holes and pre-wire with speaker cable.
  3. Fit the speakers and connect left and right with matching polarity.
  4. Play familiar music and adjust the amplifier's tone controls if needed.

Tip: Within its 60 W rated power the QS-6.1 plays cleanly; turn down if the sound hardens at high volume.

Workflow 3: Surround speakers for an existing system

Owners of a front speaker system who want to add surround channels neatly.

Connections

ConnectTo
AV receiver surround L / R terminalsTwo QS-6.1 in the side walls

Setup

  1. Choose positions slightly behind or beside the main seat, a little above ear height.
  2. Cut the install holes and run cable from the receiver.
  3. Fit and connect the speakers.
  4. Set the surround speakers to 8 Ω, set distances and levels and check with surround test tones.

Tip: The 127 mm cabinet depth keeps the speakers flush and out of the way in narrow side walls.

Workflow 4: Bedroom TV sound

Anyone who wants better TV sound in a bedroom without speakers on the furniture.

Connections

ConnectTo
TV optical or HDMI ARC outputCompact amplifier or receiver
Amplifier L / R speaker outputsTwo QS-6.1 beside the TV

Setup

  1. Fit one QS-6.1 either side of the TV at ear height from the bed.
  2. Connect them to a compact amplifier or receiver that takes the TV's audio.
  3. Set the TV to send its audio to the amplifier.
  4. Balance the volume for clear dialogue at low levels.

Tip: The 88 dB sensitivity means a small amplifier is enough for a bedroom.

Workflow 5: 7.1 dedicated home cinema room

Home cinema builders using wall speakers on all sides.

Connections

ConnectTo
AV receiver L / C / R terminalsThree QS-6.1 in the front wall
AV receiver surround and back-surround terminalsFour QS-6.1 in the side and rear walls
AV receiver subwoofer pre-outOne or two powered subwoofers

Setup

  1. Plan the layout with the front three across the screen wall and the four surrounds around the seats.
  2. Cut the install holes in the walls and pre-wire all channels to the equipment rack.
  3. Fit and connect the seven speakers, checking polarity on each.
  4. Set the receiver to a 7.1 layout with all speakers small and crossed over to the subwoofer.
  5. Calibrate distances and levels from the main seat.

Tip: Mark each cable at both ends with its channel name before closing the walls.

Workflow 6: Music in a dining or study room

Homes adding background music to a second room.

Connections

ConnectTo
Second amplifier or zone 2 outputs of an AV receiverTwo QS-6.1 in the room

Setup

  1. Fit two QS-6.1 in the walls where they will spread sound over the room.
  2. Wire them back to a small amplifier or the receiver's zone 2 outputs.
  3. Choose the source and set a comfortable background level.
  4. Adjust bass and treble to suit the room.

Tip: The slim, simple grille blends with most decoration styles, so the speakers do not draw the eye.

Request a Quote

TONEWINNER QS-6.1

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›