TOTEM ACOUSTIC KIN IC8 product guide and data sheet cover
‹
TOTEM ACOUSTIC KIN IC8 product guide and data sheet coverTOTEM ACOUSTIC KIN IC8 data sheet page 2: Stealth that draws attentionTOTEM ACOUSTIC KIN IC8 data sheet page 3: Shallow profile, simple installationTOTEM ACOUSTIC KIN IC8 data sheet page 4: Terminals and speaker wireTOTEM ACOUSTIC KIN IC8 data sheet page 5: Installing the KIN IC8TOTEM ACOUSTIC KIN IC8 data sheet page 6: Drivers and adjustmentsTOTEM ACOUSTIC KIN IC8 data sheet page 7: PlacementTOTEM ACOUSTIC KIN IC8 data sheet page 8: Grille, outdoor use and specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC KIN IC8

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: KIN ARCHITECTURAL

Totem Acoustic KIN IC8 8-inch in-ceiling speaker: polypropylene woofer, pivoting tweeter, 75° dispersion, LVI switch, weather resistant. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

General

Design8-inch in-ceiling, with LVI equalisation switch
SeriesKIN Architectural

Drivers

Woofer8-inch polypropylene
Tweeter1-inch soft dome, pivoting faceplate

Acoustic performance

Frequency response42 Hz - 30 kHz
Sensitivity (1 W/1 m)91 dB
Impedance8 Ω
Recommended amplifier power20 - 120 W
Dispersion pattern75 degrees

Installation

Dimensions (diameter × depth)271 × 116.84 mm (10.26 × 4.6 in)
Cutout247 mm (9.72 in)
GrilleWeatherproof, magnetic, paintable, virtually bezel-less white metal
Speaker terminalsSpring loaded, gold plated
Speaker wireAccepts up to 12 gauge
MountingNylon dog ears, up to a double layer of drywall
Accessories / optionsPCK8 pre-construction kit, SGK8 square grille kit

Physical

Weight2.04 kg (4.5 lb)

Product overview

The Totem Acoustic KIN IC8 is an 8-inch in-ceiling speaker from the KIN Architectural series, with a custom polypropylene woofer, a soft dome tweeter on a pivoting faceplate, 75-degree dispersion and a Low Volume Intelligibility switch, weather resistant for covered outdoor areas.

The KIN IC8 integrates seamlessly into any living space, yet its performance draws attention. Its remarkable 75-degree dispersion spreads Totem's signature powerful bass, smooth highs and natural vocals evenly through the room, so the IC8 is easy to place and the sound stays the same whether listeners are seated or standing. The pivoting tweeter faceplate aims the directional high frequencies towards the listening area where the placement is less than ideal.

The custom-designed polypropylene woofer is strong and stiff yet light and fast, for powerful yet controlled bass, and the soft dome tweeter uses a neodymium magnet in a chambered enclosure for high excursion, articulation and smoothness. The Low Volume Intelligibility (LVI) switch fine-tunes the output at low listening levels, improving the clarity of vocals and keeping the bass that is normally lost at low volume.

Installation has been made simple: high-torque, robust nylon dog ears hold the speaker in ceilings with up to a double layer of drywall, and a Unified Framework Shield, a ribbed, connected cover, protects the speaker from material inside the ceiling during installation and makes the frame more rigid. The profile is shallow, the spring-loaded terminals are gold plated and accept up to 12-gauge wire, and the micro-perforated stainless-steel grille is magnetic, paintable and virtually bezel-less.

With stainless-steel grilles and hardware and weather-resistant construction, the KIN IC8 can also be installed outdoors under covered areas and soffits. It mixes harmoniously with any traditional, on-wall or architectural Totem speaker for multi-channel systems, and optional PCK8 pre-construction kits and SGK8 square grille kits complete the installation.

Frequency response 42 Hz - 30 kHz
Sensitivity (1 W/1 m) 91 dB
Recommended amplifier power 20 - 120 W
Dispersion pattern 75°

Key features

  • 8-inch custom polypropylene woofer: strong, stiff, light and fast
  • Soft dome tweeter with a neodymium magnet in a chambered enclosure
  • Pivoting tweeter faceplate aims the high frequencies at the listening area
  • 75-degree dispersion for even coverage, seated or standing
  • Low Volume Intelligibility (LVI) switch for clear vocals and bass at low levels
  • High-torque nylon dog ears that hold in up to a double layer of drywall
  • Unified Framework Shield protects the speaker during installation and stiffens the frame
  • Shallow profile
  • Paintable, magnetic, micro-perforated stainless-steel grille, virtually bezel-less
  • Stainless-steel, weather-resistant hardware; for covered outdoor areas too
  • Spring-loaded gold-plated terminals for up to 12-gauge wire

Made for

  • Living rooms, kitchens, dining rooms, bedrooms and home offices
  • Whole-home and background music, including low-volume listening
  • Front, centre or surround channels of a 5.1 or 7.1 home theatre
  • Covered terraces, verandas and soffits, with the rear shielded from the elements
  • New construction with the PCK8 kit, or retro-fit into existing ceilings

In the box

  • 1 KIN IC8 in-ceiling speaker
  • 1 stainless-steel magnetic grille
  • 1 transparent driver protector
  • 1 cutout template

Connections

  • Spring-loaded gold-plated speaker terminals, + and -
  • Accepts speaker wire up to 12 gauge

Totem Acoustic KIN IC8: frequently asked questions

What does the LVI switch do?

The Low Volume Intelligibility switch fine-tunes the output at low listening levels, improving vocal clarity and keeping bass that is normally lost at low volume. It is set to OFF in the box; switch it ON only where the volume will typically be at ambient or moderate levels.

How far apart should KIN IC8 speakers be in the ceiling?

Totem calculates the spacing from the 75-degree dispersion and the ceiling height: about 10.8 ft (3.29 m) apart for an 8 ft ceiling, 12.15 ft (3.7 m) for 9 ft and 13.5 ft (4.11 m) for 10 ft. For stereo, place a pair at each third of the room's longest dimension.

Can the KIN IC8 be installed outdoors?

Yes, where its rear is shielded from the elements: under soffits, fascias, covered terraces and exterior walls. The stainless-steel grille and screws and the impermeable drivers make it weather resistant. It should never be installed fully exposed to the elements.

Can the grille be painted?

Yes. Peel off the scrim cloth inside the grille first, using the small tab on the trim, then paint the grille with spray paint or a spray gun at a low setting so the holes do not clog. Refit the scrim cloth when the paint is dry. The speaker frame does not need painting.

What size hole does it need?

A cutout of 247 mm (9.72 in). Trace it with the supplied template, and check for joists, pipes and wires before cutting.

Where can I buy the Totem Acoustic KIN IC8 in India?

The Totem Acoustic KIN IC8 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Ceiling stereo in the living room

Families who want music in the living room without speakers on the floor or the walls.

Connections

ConnectTo
Streamer, TV or music playerStereo amplifier input
Amplifier left and right speaker outputs (20 - 120 W recommended)Two KIN IC8 terminals

Setup

  1. Place the two speakers at each third of the room's longest dimension; with a TV, place them in front of and next to the TV.
  2. Check each location with a stud finder and a bent wire through a small pilot hole, then trace the 247 mm cutout with the template.
  3. Cut the hole, fish the cable through with about 1 ft (30 cm) of slack and strip about 3/8 in (1 cm) of each wire.
  4. Connect + to + and - to -, set the dog ears flush in the frame, insert the speaker and tighten the screws gradually.
  5. Remove the transparent driver protector and fit the magnetic grille.

Tip: Avoid corners: they cause directionality, limit dispersion and emphasise the low frequencies.

Workflow 2: Kitchen and dining background music with LVI

Homes that play music at low levels while cooking, dining or entertaining.

Connections

ConnectTo
Multi-room amplifier or stereo amplifier zone outputsKIN IC8 speakers in the kitchen and dining area

Setup

  1. Plan the spacing from the ceiling height: about 10.8 ft (3.29 m) apart for an 8 ft ceiling, 12.15 ft (3.7 m) for 9 ft.
  2. Use 16-gauge wire for runs up to 75 ft (22.86 m), 14-gauge up to 200 ft (60.96 m), 12-gauge beyond.
  3. Before installing, set the LVI switch on each speaker to ON (it leaves the factory OFF).
  4. Install the speakers and fit the grilles.

Tip: Use LVI only where the volume will normally be at ambient or moderate level.

Workflow 3: 5.1 home theatre with ceiling speakers

Film lovers who want a home theatre that disappears into the ceiling.

Connections

ConnectTo
Media player or consoleAV receiver HDMI input
AV receiver left, centre, right and surround outputsKIN IC8 speakers
AV receiver subwoofer outputSubwoofer

Setup

  1. Place the left, centre and right speakers along the same plane at the screen end of the room.
  2. Place the left and right surrounds behind and next to the seating area.
  3. Install each speaker and aim its pivoting tweeter faceplate towards the seats, pushing on the faceplate, not the tweeter.
  4. Connect all speakers with the correct polarity and run the AV receiver's set-up.

Tip: Aiming the tweeters helps most in multichannel systems; in stereo music it is generally not needed.

Workflow 4: Covered terrace or veranda

Homes with a covered outdoor seating area, balcony or soffit.

Connections

ConnectTo
Amplifier zone outputKIN IC8 speakers in the terrace ceiling or soffit

Setup

  1. Choose positions under the roof or soffit where the rear of each speaker is shielded from the elements.
  2. Run the speaker cable and cut the openings with the template.
  3. Install the speakers with their stainless-steel hardware and fit the stainless-steel grilles.
  4. Never install where the speaker would be completely exposed to rain.

Tip: Paint the grilles to match the soffit; remove the scrim cloth first and refit it when dry.

Workflow 5: New construction with the PCK8 kit

Builders, architects and homeowners planning speakers before the ceiling is closed.

Connections

ConnectTo
Speaker cable from the equipment locationPCK8 pre-construction frame at each speaker position

Setup

  1. Fix a PCK8 frame at each position, using the joist bracket to keep a row of speakers perfectly in line.
  2. Feed the speaker cable through each frame.
  3. After the drywall is installed, cut out the opening along the frame.
  4. Install the KIN IC8 in the frame as in a standard installation and fit the grille.

Tip: Fit an optional SGK8 square grille kit before the speaker goes in, to match square lights or air-conditioning grilles.

Workflow 6: Ceiling surrounds for a Totem on-wall front stage

TV rooms with a KIN Force or other Totem on-wall speakers at the front.

Connections

ConnectTo
AV receiver front outputsTotem on-wall speakers at the screen
AV receiver surround outputsTwo KIN IC8 in the ceiling

Setup

  1. Mount the on-wall speakers at the screen.
  2. Install two KIN IC8 behind and next to the seating as left and right surrounds.
  3. Aim the pivoting tweeters towards the seats if the ceiling positions are off-axis.
  4. Set distances and levels in the AV receiver.

Tip: KIN Architectural speakers mix harmoniously with any traditional, on-wall or architectural Totem speaker.

Request a Quote

TOTEM ACOUSTIC KIN IC8

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›