TOTEM ACOUSTIC Tribe Architectural AIC product guide and data sheet cover
‹
TOTEM ACOUSTIC Tribe Architectural AIC product guide and data sheet coverTOTEM ACOUSTIC Tribe Architectural AIC data sheet page 2: Ceiling speaker, ear-level soundTOTEM ACOUSTIC Tribe Architectural AIC data sheet page 3: Installation and specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC Tribe Architectural AIC

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: TRIBE ARCHITECTURAL

Totem Acoustic Tribe Architectural AIC: back-boxed angled in-ceiling speaker, twin 4-inch MHEX woofers, twin passive radiators, 47 Hz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Acoustic performance

DesignFull back-boxed, high-performance angled in-ceiling loudspeaker
Frequency response47 Hz - 30 kHz ± 3 dB
Sensitivity90 dB
Impedance6 Ω
Recommended amplifier power30 - 140 W
Dispersion75 degrees

Drivers

WoofersTwin 4-inch (10.16 cm) Neodymium Actuated Enriched MHEX, high-excursion surrounds, outsized cast baskets
Woofer conesMultiple layers of phenolic honeycomb and woven synthetics; inverted dust caps
Passive radiatorsDual 5-inch Metal Amalgamation Compound
Tweeter1 1/8-inch (29 mm) oversized soft dome, neodymium magnets, precision-machined faceplate
CrossoverHand-assembled; silver and oxygen-free copper wiring

Connections

Speaker terminalsTwo sets of gold-plated 5-way binding posts

Physical

Dimensions (W × H × D)358 × 358 × 155 mm (14.09 × 14.09 × 6 1/8 in)
Cut-out340 × 340 mm (13.38 × 13.38 in)
Back boxIntegrated wood back box
MountingHigh-torque angled clamps; screw cut-outs for flush mounting
GrilleMagnetic, paintable, virtually bezel-less micro-perforated metal
Optional accessoryPre-construction brackets (metal)
Break-in timeAt least 75 - 100 hours

Product overview

The Totem Acoustic Tribe Architectural AIC is a fully back-boxed angled in-ceiling loudspeaker with twin 4-inch Neodymium Actuated MHEX woofers, twin 5-inch passive radiators and a 1 1/8-inch tweeter on an angled baffle that directs the sound to the listening area. It reaches 47 Hz and brings the sound down to ear level.

The Tribe AIC was conceived to overcome placement challenges. Its angled baffle allows placement tight to the walls while directing the sound towards the listening area, so wherever it is installed the performance is involving and intimate. Instead of making you look up at the ceiling, it brings the sound down to your ear level, whether you are sitting or standing, and creates vast three-dimensional soundscapes for music and films alike.

The speaker takes advantage of lessons learned from Totem's Element series. The 1 1/8-inch tweeter has a premium dome, massive neodymium magnets and a precision-machined faceplate. The 4-inch Neodymium Actuated MHEX woofers use extremely rigid cones of multiple layers of phenolic honeycomb and woven synthetics, imported from Japan, with high-excursion surrounds in outsized cast baskets; their inverted dust caps smooth the higher frequencies for a perfect blend with the tweeter. The 5-inch passive radiators are made of a proprietary compound of metals chosen for their strength-to-weight ratio: unyieldingly rigid yet perfectly weighted, so the bass is both forceful and musical.

Hand-assembled crossovers are built from carefully selected premium capacitors and resistors with silver and oxygen-free copper wiring. Like all Totem speakers, the Tribe AIC is forgiving in placement and designed to blend seamlessly with other Totem speakers, and it integrates with Totem's in-wall subwoofers, the Tribe In-Wall Sub 12 and the Tribe Sub In-Wall Double 8, as well as the Tribe Solution Sub.

For the installer, an integrated wood back box ensures reliable performance, high-torque angled clamps give an even structural tension, screw cut-outs in the frame allow flush-to-joist installation where the clamps cannot deploy, and rear wire-management channels keep the cabling tidy. The micro-perforated metal grille is magnetic, paintable and virtually bezel-less, and optional metal pre-construction brackets allow installation before the ceiling board goes up.

Frequency response (± 3 dB) 47 Hz - 30 kHz
Sensitivity 90 dB
Recommended amplifier power 30 - 140 W
Cut-out 340 × 340 mm

Key features

  • Angled baffle: placement tight to the walls with the sound directed to the listening area
  • Sound brought down to ear level, seated or standing
  • Twin 4-inch Neodymium Actuated MHEX woofers: multi-layer phenolic honeycomb and woven synthetic cones, inverted dust caps
  • Twin 5-inch passive radiators of a proprietary metal compound
  • 1 1/8-inch tweeter with massive neodymium magnets and a precision-machined faceplate
  • Hand-assembled crossovers with premium parts and silver and oxygen-free copper wiring
  • Technology from Totem's Element series
  • Integrated wood back box
  • High-torque angled clamps and screw cut-outs for flush-to-joist installation
  • Rear wire-management channels
  • Magnetic, paintable, virtually bezel-less micro-perforated metal grille
  • Two sets of gold-plated 5-way binding posts

Made for

  • Home theatres where the front, centre or surround speakers must go into the ceiling
  • Living rooms, kitchens and open-plan spaces with music from the ceiling
  • Rooms where wall space is taken by windows, cabinets or artwork
  • Systems with Totem in-wall subwoofers or the Tribe Solution Sub

Placement and installation

  • The three active drivers sit on one part of the angled baffle and the two passive radiators on the other: install the active part closest to the wall, angled towards the listening area
  • Tribe Architectural speakers disperse at 75 degrees; coverage radius = 75 × 0.018 × ceiling height, which is about 1.35 × the ceiling height
  • Before cutting, check for joists, ducts, pipes and wires with a stud finder and a bent piece of wire through a small hole in the centre of the outline
  • Trace the 340 × 340 mm (13.38 × 13.38 in) cut-out with the provided template and cut it with a drywall saw; lightly compress any insulation
  • Allow at least 1 ft (30 cm) of cable slack, strip 3/8 in (1 cm) and respect polarity
  • Set the clamps flush in the frame, insert the speaker and tighten the frame screws gradually, ideally at a lower torque setting
  • Break-in: at least 75 - 100 hours of actual music playing, without very loud levels during that time

In the box

  • Tribe Architectural AIC speaker
  • Paintable magnetic metal grille

Connections

  • Two sets of gold-plated 5-way binding posts, linked by jumpers
  • Rear wire-management channels

Totem Acoustic Tribe Architectural AIC: frequently asked questions

Why is the Tribe Architectural AIC angled?

The angled baffle lets the speaker sit tight to the walls while directing the sound towards the listening area, so the sound arrives at ear level whether you are seated or standing, instead of obviously coming from the ceiling.

Which way round should it be installed?

Install the part of the baffle with the three active drivers closest to the wall, angled towards the listening area. The two passive radiators then sit nearer the listening area, facing towards the wall.

Which subwoofers suit it?

The Tribe AIC is designed to integrate seamlessly with Totem's in-wall subwoofers, the Tribe In-Wall Sub 12 and the Tribe Sub In-Wall Double 8, and the Tribe Solution Sub is also a perfect match.

What amplifier power does it need?

Totem recommends 30 - 140 W. The impedance is 6 Ω and the sensitivity 90 dB.

Can the grille be painted?

Yes. Peel off the scrim cloth by its small tab along the trim, spray-paint the grille at a low setting so the holes do not clog, let it dry and re-apply the scrim cloth, which keeps its adhesion.

Where can I buy the Totem Acoustic Tribe Architectural AIC in India?

The Totem Acoustic Tribe Architectural AIC is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: In-ceiling 5.1 home theatre

Living rooms and media rooms where no speaker should be seen.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver L / C / R and surround outputsTribe AIC speakers in the ceiling
AV receiver subwoofer pre-outTribe In-Wall Sub 12 amplifier, Double 8 amplifier or Tribe Solution Sub

Setup

  1. Mark the front three AIC positions along the same line near the screen wall, and the surrounds beside and behind the seating.
  2. Orient each speaker with its active drivers nearest the wall, angled towards the seating.
  3. Cut the 340 × 340 mm openings with the template and fish the cables through.
  4. Connect with the correct polarity, insert the speakers and fit the grilles.
  5. Add a Totem subwoofer and run the receiver's speaker set-up.

Tip: The angled baffle lets the speakers sit tight to the walls and still aim at the listening area.

Workflow 2: Ceiling surrounds for an existing system

Rooms with front speakers already in place that need hidden surround channels.

Connections

ConnectTo
AV receiver surround L / R outputsTwo Tribe AIC speakers

Setup

  1. Place the two AIC speakers in the ceiling beside and slightly behind the seating.
  2. Point the active drivers towards the listening area.
  3. Connect them to the surround outputs with the correct polarity.
  4. Set distances and levels in the receiver.

Tip: Tribe Architectural speakers blend harmoniously with Totem traditional, on-wall and in-wall speakers.

Workflow 3: Music in an open-plan living and dining area

Homes where music should fill a large open room from the ceiling.

Connections

ConnectTo
Stereo amplifier or streaming amplifier L / R outputs (30 - 140 W recommended)Tribe AIC speakers

Setup

  1. Work out the coverage: radius = 75 × 0.018 × ceiling height, about 1.35 × the ceiling height.
  2. Space the speakers so their coverage circles reach every seating and standing area.
  3. Install each speaker near a wall with its active drivers aimed into the room.
  4. Connect left and right with the correct polarity.
  5. Break the speakers in with 75 - 100 hours of music at moderate levels.

Tip: The wide dispersion gives the same sound seated or standing, which suits rooms where people move around.

Workflow 4: Front stage in the ceiling when the TV wall is full

Rooms where windows, cabinets or a large screen leave no space for wall speakers.

Connections

ConnectTo
AV receiver front L / C / R outputsThree Tribe AIC speakers close to the TV wall

Setup

  1. Install three AIC speakers in the ceiling close to the TV wall, along the same line.
  2. Turn each so its active drivers are nearest the wall and angled towards the seating.
  3. Connect with the correct polarity and fit the grilles.
  4. Level-match the three speakers in the receiver.

Tip: The angled baffle brings dialogue down towards ear level instead of from overhead.

Workflow 5: Retrofit into an existing ceiling

Finished homes where the speakers go into the existing ceiling board.

Connections

ConnectTo
Speaker cable fished through the ceilingTribe AIC binding posts

Setup

  1. Check for joists, ducts, pipes and wires with a stud finder.
  2. Trace the template, drill a small hole in the centre and rotate a bent piece of wire to check the cavity.
  3. Cut the opening with a drywall saw, remove the cut-away and lightly compress any insulation.
  4. Fish the cable through with at least 1 ft (30 cm) of slack, strip 3/8 in (1 cm) and connect with the correct polarity.
  5. Set the clamps flush in the frame, insert the speaker, tighten the screws gradually and fit the grille.

Tip: A lower torque setting on the screwdriver prevents accidents and ensures a proper installation.

Workflow 6: New construction with painted grilles

Homes being built or renovated, where the grilles should match the ceiling.

Connections

ConnectTo
Pre-wired speaker cablePre-construction bracket position

Setup

  1. Fit the optional metal pre-construction brackets before the ceiling board goes up and pre-wire each position.
  2. After the ceiling is finished, install the speakers in the brackets.
  3. Peel the scrim cloth off each grille by its small tab.
  4. Spray-paint the grilles at a low setting so the micro-perforations do not clog.
  5. Re-apply the scrim cloth when the paint is dry and fit the grilles.

Tip: Plan the orientation of each angled baffle before pre-wiring, so the active drivers face the listening area.

Request a Quote

TOTEM ACOUSTIC Tribe Architectural AIC

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›