TOTEM ACOUSTIC Tribe Architectural LCR product guide and data sheet cover
‹
TOTEM ACOUSTIC Tribe Architectural LCR product guide and data sheet coverTOTEM ACOUSTIC Tribe Architectural LCR data sheet page 2: One speaker for left, centre and rightTOTEM ACOUSTIC Tribe Architectural LCR data sheet page 3: Installation and specifications
›

Brand: TOTEM ACOUSTIC

TOTEM ACOUSTIC Tribe Architectural LCR

PRICE ON ENQUIRY

Category: In-Wall & In-Ceiling Speakers | Series: TRIBE ARCHITECTURAL

Totem Acoustic Tribe Architectural LCR: back-boxed in-wall LCR speaker, twin 4-inch MHEX woofers, twin 5-inch passive radiators, 50 Hz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.


WhatsApp
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)

PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.


TECHNICAL SPECIFICATIONTech SpecsDESCRIPTIONDescriptionREAL-WORLD WORKFLOWSReal-World Workflows

Acoustic performance

DesignFull back-boxed, high-performance in-wall loudspeaker
Frequency response50 Hz - 30 kHz ± 3 dB
Sensitivity (1 W/1 m)90 dB
Impedance6 Ω
Recommended amplifier power30 - 140 W
Dispersion75 degrees

Drivers

WoofersTwin 4-inch (10.16 cm) Neodymium Actuated Enriched MHEX, high-excursion surrounds, outsized cast baskets
Passive radiatorsDual 5-inch Metal Amalgamation Compound, high excursion
Tweeter1 1/8-inch (29 mm) oversized silk (soft) dome
Driver layoutSymmetrical, for left, centre or right

Connections

Speaker terminalsTwo sets of gold-plated 5-way binding posts

Physical

Dimensions (W × H × D)180 × 648 × 95.25 mm (7.09 × 25.51 × 3.75 in)
Cut-out (W × H)161.8 × 630 mm (6.37 × 24.8 in)
Back boxIntegrated wood back box
FrameSteel-buttressed framework, high-torque angled wall clamps, screw cut-outs for flush-to-stud mounting
GrilleMagnetic, paintable, virtually bezel-less micro-perforated metal; adds 4 mm to the total width
Optional accessoryPre-construction brackets (metal)
Break-in timeAt least 75 - 100 hours

Product overview

The Totem Acoustic Tribe Architectural LCR is a fully back-boxed in-wall loudspeaker with a symmetrical array of twin 4-inch Neodymium Actuated Enriched MHEX woofers, twin 5-inch MAC passive radiators and a 1 1/8-inch oversized silk dome tweeter, for the left, centre or right channel. It reaches 50 Hz from a cabinet only 95.25 mm deep.

The all-enclosed, meticulously crafted Tribe LCR brings Totem's imaging, off-axis performance and full-range musicality to an architectural speaker, with majestic and awe-inspiring sound. It is thoroughly equipped with interrelated proprietary Totem technology: Neodymium Actuated Enriched MHEX woofers with high-excursion surrounds in outsized die-cast baskets deliver powerful, lightning-fast bass, and a proprietary 1 1/8-inch (29 mm) oversized silk dome tweeter gives a fluid, airy presence.

Two 5-inch passive radiators of Metal Amalgamation Compound (MAC), a proprietary high-excursion design, tune the cabinet's bass ability and help create deep bass from a sealed enclosure. The drivers are arranged symmetrically around the tweeter, so the same speaker works in the left, centre or right position, with precise sound staging and phase correctness. Designed to immerse the listener in a realistic 3D sonic experience, it is equally skilful with music, films and gaming, whatever the size of the room.

For the installer, an integrated wood back box gives reliable, consistent performance in new construction or retrofit. A robust steel-buttressed framework handles the toughest installations, high-torque angled wall clamps give an even structural tension, screw cut-outs in the frame allow flush-to-stud installation where the clamps cannot deploy, and rear wire-management channels keep the cabling tidy. Tribe Architectural speakers disperse at 75 degrees for coverage across the whole listening area.

The micro-perforated metal grille adds only 4 mm to the total width and gives a uniform look without showing what lies behind. Dozens of magnets grip it securely to prevent resonance and gaps, and it can be painted to match the décor. Optional metal pre-construction brackets allow installation before the drywall goes up.

Frequency response (± 3 dB) 50 Hz - 30 kHz
Sensitivity (1 W/1 m) 90 dB
Recommended amplifier power 30 - 140 W
Depth 95.25 mm

Key features

  • Symmetrical driver array for left, centre or right channel positions
  • Twin 4-inch Neodymium Actuated Enriched MHEX woofers with high-excursion surrounds in outsized die-cast baskets
  • Twin 5-inch Metal Amalgamation Compound passive radiators, high excursion, for deep bass from a sealed enclosure
  • 1 1/8-inch (29 mm) proprietary oversized silk dome tweeter
  • Integrated wood back box for consistent performance in any wall
  • 75-degree dispersion for coverage across the whole listening area
  • Shallow design: 95.25 mm (3.75 in) deep
  • Robust steel-buttressed framework and high-torque angled wall clamps
  • Screw cut-outs in the frame for flush-to-stud installation
  • Rear wire-management channels
  • Magnetic, paintable, virtually bezel-less micro-perforated metal grille held by dozens of magnets
  • Two sets of gold-plated 5-way binding posts

Made for

  • Left, centre and right channels of a home theatre or living-room TV system
  • Stereo music, placed in front of and beside the TV
  • Music, films and gaming
  • New construction and retrofit installations
  • Systems that mix Totem in-wall, on-wall, architectural and traditional speakers

Placement and installation

  • Left, centre and right speakers along the same plane
  • Main channels: at or slightly above ear level; sit no closer than the distance between the speakers
  • With a TV or for stereo: in front of and beside the TV, with some distance from rear and side walls when possible
  • Corner locations cause directionality, limit dispersion and emphasise low frequencies
  • Before cutting, check the cavity with a stud finder and a bent piece of wire through a small hole in the centre of the outline
  • Cut-out 161.8 × 630 mm (6.37 × 24.8 in); allow at least 1 ft (30 cm) of cable slack and strip 3/8 in (1 cm)
  • Tighten the frame screws gradually, ideally at a lower torque setting
  • Break-in: at least 75 - 100 hours of actual music playing, without very loud levels during that time

In the box

  • Tribe Architectural LCR speaker
  • Paintable magnetic metal grille

Connections

  • Two sets of gold-plated 5-way binding posts, linked by jumpers
  • Rear wire-management channels

Totem Acoustic Tribe Architectural LCR: frequently asked questions

Can the same Tribe Architectural LCR be used for left, centre and right?

Yes. Its symmetrical driver array is designed for the left, centre or right channel position, so three identical speakers can form a matched front stage.

Why does it have passive radiators?

The twin 5-inch Metal Amalgamation Compound passive radiators tune the cabinet's bass ability and help create deep bass from a sealed enclosure, extending the response down to 50 Hz.

What amplifier power does it need?

Totem recommends 30 - 140 W. The impedance is 6 Ω and the sensitivity 90 dB (1 W/1 m).

Can the grille be painted?

Yes. Peel off the scrim cloth by its small tab along the trim, spray-paint the grille at a low setting so the holes do not clog, let it dry and re-apply the scrim cloth, which keeps its adhesion.

Can it be installed before the drywall?

Yes, with the optional pre-construction brackets. Their frames and wings are made of metal, as robust as the speaker itself.

Where can I buy the Totem Acoustic Tribe Architectural LCR in India?

The Totem Acoustic Tribe Architectural LCR is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.

Workflow 1: Matched in-wall front stage for a TV

Living rooms and media rooms where the left, centre and right speakers should disappear into the TV wall.

Connections

ConnectTo
TV with HDMI eARCAV receiver HDMI eARC input
AV receiver front L / C / R speaker outputsThree Tribe LCR speakers

Setup

  1. Plan three Tribe LCR speakers along the same plane: left and right beside the TV, centre below or above the screen.
  2. Place the left and right speakers at or slightly above ear level.
  3. Run cable from the receiver to each position, leaving at least 1 ft (30 cm) of slack.
  4. Connect with the correct polarity and fit the grilles.
  5. Set the speaker distances and levels in the receiver.

Tip: The symmetrical driver array means all three speakers are identical, for seamless pans across the front.

Workflow 2: 5.1 home theatre with Tribe Architectural speakers

Families building a complete in-wall surround system.

Connections

ConnectTo
AV receiver front L / C / R outputsThree Tribe LCR speakers
AV receiver surround L / R outputsTribe Architectural IW speakers in the side walls
AV receiver subwoofer pre-outTotem Tribe in-wall subwoofer amplifier or Tribe Solution Sub

Setup

  1. Install the three Tribe LCR speakers along the same plane at the front.
  2. Install the surrounds beside and slightly behind the seating at about 6 ft (1.8 m) high.
  3. Add a Totem subwoofer for the low-frequency effects.
  4. Connect everything with the correct polarity and run the receiver's speaker set-up.
  5. Allow at least 75 - 100 hours of break-in before very loud playback.

Tip: Tribe Architectural models mix harmoniously with Totem on-wall and traditional speakers too.

Workflow 3: Stereo music on the TV wall

Music lovers who want hi-fi stereo from speakers hidden in the wall.

Connections

ConnectTo
Stereo amplifier L / R outputs (30 - 140 W recommended)Two Tribe LCR speakers

Setup

  1. Install the speakers in front of and beside the TV at or slightly above ear level.
  2. Leave some distance from rear and side walls when possible.
  3. Sit no closer than the distance between the speakers.
  4. Connect left and right with the correct polarity.
  5. Break the speakers in with 75 - 100 hours of music at moderate levels.

Tip: Corner positions limit dispersion and emphasise bass: keep the speakers out of the corners.

Workflow 4: Centre channel only

Rooms with floor-standing or on-wall front speakers that need a hidden centre for dialogue.

Connections

ConnectTo
AV receiver centre outputOne Tribe LCR, installed below or above the screen

Setup

  1. Find a stud bay centred on the screen, below or above it.
  2. Check the cavity, cut the 161.8 × 630 mm opening and fish the cable through.
  3. Mount the LCR in line with the left and right speakers, along the same plane.
  4. Connect, fit the grille and level-match the centre in the receiver.

Tip: The symmetrical driver array is designed for the centre position as well as left and right.

Workflow 5: Retrofit into an existing wall

Finished homes where the speakers go into existing drywall.

Connections

ConnectTo
Speaker cable fished through the wallTribe LCR binding posts

Setup

  1. Use a stud finder to check for studs, pipes, ducts and wires.
  2. Trace the cut-out, drill a small hole in the centre and rotate a bent piece of wire to check the cavity.
  3. Cut the opening with a drywall saw and fish the cable through, with at least 1 ft (30 cm) of slack.
  4. Strip 3/8 in (1 cm) of wire, connect with the correct polarity and insert the speaker with the clamps set flush in the frame.
  5. Tighten the frame screws gradually, ideally at a lower torque setting, then fit the magnetic grille.

Tip: Where the clamps cannot deploy, screw the frame flush to a stud through the screw cut-outs.

Workflow 6: New construction with painted grilles

Homes being built or renovated, where the speakers should match the walls.

Connections

ConnectTo
Pre-wired speaker cablePre-construction bracket position

Setup

  1. Fit the optional metal pre-construction brackets before the drywall goes up and pre-wire each position.
  2. After the drywall is finished, install the speakers in the brackets.
  3. Peel the scrim cloth off each grille by its small tab.
  4. Spray-paint the grilles at a low setting so the micro-perforations do not clog.
  5. Re-apply the scrim cloth when the paint is dry and fit the grilles.

Tip: Dozens of magnets hold the grille tight against the wall, preventing resonance and gaps.

Request a Quote

TOTEM ACOUSTIC Tribe Architectural LCR

Explore all the categories

Studio to stage, every category —

View all ›

Explore all the brands

Genuine gear from leading audio brands —

View all ›