


TOTEM ACOUSTIC Tribe Sub In-Wall Double 8
PRICE ON ENQUIRY
Totem Acoustic Tribe Sub In-Wall Double 8: back-boxed in-wall sub, 2 × 8-inch carbon fibre drivers, 500 W amp supplied, 26 Hz. Available in India from Shivansh Electronics, Kolkata, West Bengal, India.
VISUAL GUIDE — See Every Photo, Spec & Setup Step (PDF)
PRICE ON ENQUIRY. For the price, exclusive offers, delivery timelines, or any other information, please Contact / WhatsApp +91 89818 07755 / +91 91477 00677. We will gladly share a personalised quotation for Shivansh Electronics, Kolkata, West Bengal, India. All payments are processed securely through Razorpay, our secure payment gateway.
Subwoofer module
| Design | Full back-boxed, high-performance in-wall subwoofer |
| Frequency response | 26 Hz - 200 Hz |
| Woofers | 2 × 8-inch (20.32 cm) ballistic carbon fibre cones, cast frames, no passive radiators |
| Recommended power | Supplied 500 W external Totem amplifier |
| Speaker terminals | Gold-plated 5-way binding posts |
| Grille | Magnetic, paintable, virtually bezel-less white metal |
| Dimensions (W × H × D) | 366.7 × 596.9 × 96 mm (14.44 × 23.5 × 3.78 in) |
| Cut-out (W × H) | 315 × 569 mm (12.4 × 22.4 in) |
| Weight | 9.98 kg (22 lb) |
| Mounting | Wood studs (not aluminium), stud frame openings or wing clips |
| Subs per amplifier | Two Double 8 modules in parallel |
Tribe amplifier
| Maximum continuous power | 500 W |
| Input impedance | > 20 kΩ |
| Level control | Adjusts input signal level |
| Low-pass filter | Variable 40 Hz - 120 Hz; bypass fully clockwise |
| Crossover / bypass switch | Engages or disengages the low-pass filter |
| Phase | 0 - 180 degrees, continuously variable |
| Power mode | On / Auto (sleep after 20 - 30 minutes without signal) |
| Power indicator | Logo light: red in standby, blue when active, fading after 30 seconds |
| Protection | Limiter |
| Line inputs | 1 pair RCA |
| Line outputs | 1 pair RCA (unfiltered) |
| Output to sub module | 1 pair binding posts |
| Model select switch | SUB8 / SUB12 |
| Mains | 100-120 V / 220-230 V, auto sensing; fuse T5AL, 250 V |
| Dimensions incl. feet (W × H × D) | 431.8 × 57.15 × 355.6 mm (17 × 2.25 × 14 in) |
| Width with rack ears | 482.6 mm (19 in), 1U |
| Net weight | 6.8 kg (15 lb) |
Versions
| TRIBE-SUB-IN-WALL-DOUBLE-8-SATIN-WHITE | Satin White |
| TRIBE-SUB-IN-WALL-DOUBLE-8-SATIN-BLACK | Satin Black |
Product overview
The Totem Acoustic Tribe Sub In-Wall Double 8 is a fully back-boxed in-wall subwoofer with two active 8-inch ballistic carbon fibre drivers, supplied with a 500 W external Tribe amplifier. It reaches 26 Hz from an enclosure only 96 mm deep, behind a paintable, virtually bezel-less magnetic grille.
Designed to integrate seamlessly with the Tribe Series and immerse the listener in a totally realistic 3D sonic experience, the Tribe Sub In-Wall Double 8 brings exactness, speed and musicality to the bass of a home cinema or music system. It is made for easy use under any conditions and performs with astonishing presence whatever the size of the room.
The two high-performance, cast-frame active drivers have stiff ballistic carbon fibre cones. They are designed to work without passive radiators, which permits a much smaller footprint and a smaller grille opening while keeping exceptional performance. The drivers sit in their own sealed-in sub-enclosure, so the in-wall installation does not depend on the wall cavity.
Power comes from the supplied Tribe subwoofer amplifier, a one-rack-unit design with 500 W maximum continuous power that fits a standard 19-inch rack (rack ears included) or stands on a shelf on its feet. Its front panel has a level control, a low-pass crossover variable from 40 to 120 Hz with a bypass position, continuously variable phase from 0 to 180 degrees, a crossover / bypass switch and an On / Auto power-mode switch. On the rear are stereo RCA line inputs, RCA line outputs to feed a further sub amplifier, binding posts for the sub module, a model select switch and an auto-sensing mains input for 100-120 V or 220-230 V. A limiter lowers the level automatically if the amplifier is severely overdriven.
Two Double 8 modules can be driven by one Tribe amplifier when wired in parallel, for even more bass from a single amplifier. The magnetic white metal grille is paintable to match the décor, and the sub is available in Satin White or Satin Black.
| Frequency response | 26 Hz - 200 Hz |
| Supplied external amplifier | 500 W |
| Ballistic carbon fibre drivers | 2 × 8-inch |
| Enclosure depth | 96 mm |
Key features
- Two active 8-inch drivers with stiff ballistic carbon fibre cones and cast frames
- No passive radiators: a smaller footprint and grille opening
- Fully back-boxed high-performance in-wall enclosure, 96 mm (3.78 in) deep
- Supplied 500 W external Tribe amplifier, one rack unit high, rack ears included
- Low-pass crossover 40 - 120 Hz with bypass, for use with an external crossover
- Continuously variable phase, 0 - 180 degrees, and level control
- On / Auto power mode with sleep after 20 - 30 minutes without signal
- RCA line out to add a second in-wall sub and amplifier
- Two Double 8 modules in parallel on one Tribe amplifier
- Magnetic, paintable, virtually bezel-less white metal grille
- Gold-plated 5-way binding post terminals
- Auto-sensing mains input, 100-120 V / 220-230 V
Made for
- Home cinemas and media rooms where the subwoofer should disappear into the wall
- Stereo and home theatre systems, blending with Totem speakers, including the Tribe Series
- Custom installations with an equipment rack
- New builds and renovations with wood-stud walls
Installation
- Install close to the floor, at least 12 in (30.48 cm) from any side wall, with the terminals facing upwards
- Cut the opening with the supplied template: cut-out 315 × 569 mm (12.4 × 22.4 in)
- The Double 8 fits comfortably between studs spaced 12 in (30.48 cm) and is positioned against one stud
- Preferred fixing: 1¾-inch wood screws (#8 or #10) through the stud frame openings into the studs; an extra 2 × 4 piece of wood on the open side lets you use the openings on both sides
- Alternative fixing: the built-in wing clips; if they are not used, make sure they are firmly fastened to the chassis
- Must be fixed to wood studs, not aluminium
- Amplifier: in a 19-inch rack or on a shelf, with at least 3 in (7.62 cm) above and beside it and 5 in (12.7 cm) behind; do not stack amplifiers directly on each other
- Break-in: at least 85 - 100 hours of actual playing, without very loud levels during that time
In the box
- Tribe Sub In-Wall Double 8 module with integrated sub-enclosure
- Magnetic, paintable white metal grille
- Tribe subwoofer amplifier, 500 W
- Rack ears for the amplifier
- Cut-out template
Connections
- Sub module: gold-plated 5-way binding post terminals
- Amplifier: one pair of RCA line inputs (stereo L / R, or one input for a mono LFE signal)
- Amplifier: one pair of RCA line outputs (unfiltered) to feed an additional sub amplifier
- Amplifier: one pair of 5-way binding posts to the sub module
- Amplifier: removable power cord receptacle, auto-sensing 100-120 V / 220-230 V, user-replaceable fuse (T5AL, 250 V)
Finishes
- Satin White
- Satin Black
Totem Acoustic Tribe Sub In-Wall Double 8: frequently asked questions
Is an amplifier included with the Tribe Sub In-Wall Double 8?
Yes. A 500 W external Tribe subwoofer amplifier and its rack ears are supplied. Set the amplifier's model select switch to the Sub 8 position.
Can two Double 8 subwoofers share one amplifier?
Yes. Two Double 8 modules can be connected to one Tribe amplifier, in parallel only: both positive wires to the red binding post and both negative wires to the black one. Never connect them in series.
How is the Double 8 fixed in the wall?
Cut the opening with the supplied template (315 × 569 mm), then screw the sub into the wood studs through the stud frame openings with 1¾-inch wood screws (#8 or #10), or use the built-in wing clips. It must be fixed to wood studs, not aluminium.
Where in the wall should it go?
Close to the floor and at least 12 in (30.48 cm) from any side wall, with the terminals facing upwards.
Can I use the crossover in my AV receiver instead?
Yes. The crossover / bypass switch takes the amplifier's low-pass filter out of the circuit, and turning the crossover dial fully to the right also bypasses it, so an external crossover such as the receiver's bass management can be used.
Where can I buy the Totem Acoustic Tribe Sub In-Wall Double 8 in India?
The Totem Acoustic Tribe Sub In-Wall Double 8 is available from Shivansh Electronics, Kolkata, West Bengal, India, with delivery across India.
Workflow 1: Dedicated home cinema with an in-wall sub
Home cinema owners who want deep bass with nothing standing in the room.
Connections
| Connect | To |
|---|---|
| AV receiver or processor SUB OUT / LFE | Tribe amplifier RCA line input (left or right) |
| Tribe amplifier binding posts | Double 8 module terminals |
Setup
- Mark the position close to the floor, at least 12 in (30.48 cm) from any side wall, with the terminals facing up.
- Cut the opening with the supplied template and fix the module into the wood studs.
- Run speaker cable from the module to the amplifier: positive to the red post, negative to the black post.
- Connect the receiver's subwoofer output to one RCA line input of the amplifier and set the model select switch to Sub 8.
- Set the crossover / bypass switch to bypass and let the receiver's bass management handle the crossover.
- Fit the magnetic grille, painted to match the wall if you like.
Tip: Make every connection with the amplifier's power switch off.
Workflow 2: Two Double 8 subs on one amplifier
Larger cinema rooms that need more bass output from a single amplifier.
Connections
| Connect | To |
|---|---|
| AV receiver SUB OUT | Tribe amplifier RCA line input |
| Tribe amplifier binding posts | Both Double 8 modules, wired in parallel |
Setup
- Install both modules close to the floor and at least 12 in (30.48 cm) from side walls.
- Connect both positive wires to the amplifier's red (+) binding post.
- Connect both negative wires to the black (-) binding post.
- Check polarity carefully: out-of-polarity connections degrade the sound and can damage the speakers.
- Set the level and phase from the listening position.
Tip: Never connect multiple subwoofers in series.
Workflow 3: Stereo music room with in-wall bass
Music listeners with in-wall or bookshelf speakers who want fuller bass from a stereo amplifier.
Connections
| Connect | To |
|---|---|
| Stereo amplifier or preamplifier pre-outs (L / R) | Tribe amplifier RCA line inputs (L / R) |
| Tribe amplifier binding posts | Double 8 module |
Setup
- Install the module and connect it to the amplifier binding posts.
- Connect both left and right pre-outputs to both RCA line inputs.
- Engage the low-pass filter and start with the crossover dial at a low setting.
- Raise the level until the bass blends with the main speakers.
- Have someone turn the phase control while you listen from your seat, and keep the setting with the fullest bass.
Tip: The phase control helps integration when the sub and the main speakers are in different positions.
Workflow 4: Rack-mounted custom installation
Installers who keep all electronics in one equipment rack.
Connections
| Connect | To |
|---|---|
| Tribe amplifier with rack ears | Standard 19-inch rack, 1U |
| Processor subwoofer output | Tribe amplifier RCA line input |
Setup
- Fit the supplied rack ears and mount the amplifier in a 19-inch rack.
- Leave at least 3 in (7.62 cm) above and beside the amplifier and 5 in (12.7 cm) behind it; do not stack it directly on another amplifier.
- Check the AC mains label above the power connector: the input is auto-sensing for 100-120 V and 220-230 V.
- Set the On / Auto switch to Auto so the amplifier sleeps after 20 - 30 minutes without signal.
- Run speaker cable from the rack to the module in the wall.
Tip: On a shelf instead of a rack, the supplied feet give enough clearance.
Workflow 5: Adding a second sub and amplifier
Rooms that need a second in-wall sub with its own amplifier.
Connections
| Connect | To |
|---|---|
| First Tribe amplifier RCA line outputs | Second amplifier RCA line inputs |
| Each amplifier's binding posts | Its own in-wall sub module |
Setup
- Connect the source to the first amplifier's line inputs.
- Run an RCA cable from the first amplifier's line outputs to the second amplifier's inputs.
- Set each amplifier's model select switch to the model it drives.
- Adjust level and phase on each amplifier so both subs work together.
Tip: The line outputs are unfiltered, so the second amplifier receives the full source signal.
Workflow 6: New build or renovation
Homes under construction or renovation with wood-stud walls.
Connections
| Connect | To |
|---|---|
| Speaker cable through the wall | Double 8 terminals (facing upwards) |
Setup
- Plan the position between studs 12 in (30.48 cm) apart, against one stud, close to the floor.
- Add a 2 × 4 piece of wood on the open side if you want to use the stud frame openings on both sides.
- Cut the 315 × 569 mm opening with the template.
- Screw the module to the studs with 1¾-inch wood screws (#8 or #10), or use the wing clips.
- If the wing clips are not used, check they are firmly fastened to the chassis to avoid vibration.
Tip: The sub must be fixed to wood studs, not aluminium.








